Ho letto questo:
On the GFA-7807, the input impedance of 100K ohms for the unbalanced RCA input drastically drops to a mere 10K ohms for the balanced XLR input, due to an unusual resistor dividing network that Adcom has inserted across the input for the balanced XLR input, so it is possible that at least some of the sonic degradation we heard was caused by this low 10K ohm input impedance stressing the audio component driving the GFA-7807. In any case, this means that we would not recommend using the balanced inputs of the GFA-7807 for domestic audio systems, since many domestic audio components are not intended for driving low impedances like 10K ohms with optimum fidelity, and since the GFA-7807 sounds much worse through its balanced XLR inputs with such domestic components, whatever the cause. On the other hand, in professional studio environments, even lower impedances such as 600 ohms are the norm, and so the GFA-7807's low 10K ohm input impedance would not be problematic here (but the jury is still out on whether the GFA-7807's balanced XLR input sounds intrinsically worse than its unbalanced RCA input, for some other reason).
Fortunately for you, the unbalanced RCA connection is of course the common connection readily available on all domestic electronic components, so you can simply use the GFA-7807's unbalanced RCA inputs, secure in the knowledge that you are hearing the Adcom GFA-7807 at its wonderful best.
Tradotto:
Sul GFA-7807, l'impedenza di ingresso di 100K ohm per l'ingresso sbilanciato RCA scende drasticamente ad un semplice 10K ohm per l'ingresso bilanciato XLR, a causa di una rete di resistenza inusuale dividendo che Adcom ha inserito attraverso l'input per l'ingresso bilanciato XLR, quindi è possibile che almeno alcuni di degrado sonico che abbiamo sentito è stato causato da questa bassa impedenza di ingresso 10K ohm sottolineando la componente audio guida del GFA-7807. In ogni caso, questo significa che non consiglio di utilizzare gli ingressi bilanciati del GFA-7807 per sistemi audio domestici, dal momento che molti componenti audio domestico non sono destinati per la guida a bassa impedenza come Ohm 10K con fedeltà ottimale, e dato che la GFA-7807 suona molto peggio attraverso i suoi ingressi bilanciati XLR con quali componenti interne, qualunque sia la causa. D'altra parte, negli ambienti di studio professionale, anche impedenze inferiori come 600 ohm sono la norma, e così il GFA-7807 a bassa 10K impedenza di ingresso ohm non sarebbe problematico qui (ma la giuria è ancora fuori dal fatto che il GFA-7807 è ingresso bilanciato XLR suoni intrinsecamente peggiore rispetto al suo ingresso sbilanciato RCA, per qualche altro motivo).
Fortunatamente per voi, la connessione sbilanciata RCA è ovviamente la connessione comune facilmente reperibile su tutti i componenti interni elettronici, in modo da poter usare semplicemente il GFA-7807 è sbilanciato ingressi RCA, con la certezza che state ascoltando la Adcom GFA-7807 al suo meglio meraviglioso.
Confermate che è possibile?