26/12/2016
Firmware Vers: 3600-0161-6640 (DZ16-076, AVRX2100WBKE2)
1) The customers not being able to login to the Pandora service from the product.
(The firmware corrected only AVR-S700W E3 and AVR-X1100W E3) ( USA Products only )
2) When the language setting of the unit is of Polish, the erroneous information
is displayed in the Information screen OSD if the Dynamic EQ is set to ON.
(Information screen OSD displays off.)
The symptom is a problem that the setting of Dynamic EQ will not be
displayed correctly in the Information screen OSD when the Dynamic EQ is
set to ON in a Polish language.
3) German-specific text characters (Ä, Ö, Ü, ä, ö, ü and "ß") are not displayed
correctly when the customer plays a specific IR station (Fritz vom rbb 102,6
"Fritz - Und das hört man") in Germany. The symptom is a problem that
German-specific text characters (Ä, Ö, Ü, ä, ö, ü and "ß") are not displayed
correctly.
4) In a network environment in which AV receiver is connected, the network
module of the AV receiver reboots when Netflix APP starts on the iOS device.
The symptom is a problem that the network module of the AV receiver
reboots when Netflix APP starts on the iOS device.
5) The audio intermittently becomes interrupted when HD cable TV program
switches from DD with DSU to PCM based commercial using Dolby
Surround.
The symptom is a problem that the audio intermittently becomes interrupted
when HD cable TV program switches from DD with DSU to PCM based
commercial using Dolby Surround.
(USA only )
6) When the customer receives a specific Internet radio station (Radioeins), the
product does not display Ä, Ö, Ü (German letters) on the display.
The symptom is a problem that the product do not display Ä, Ö, Ü (German
letters) on the display.
7) If the product is connected to "Sptify Connect" in the past and the music
streaming service was being used, the product continue searching for the
WiFi signal and will display "Looking for wireless network" when Factory
Reset is executed with the product, so the access point cannot be found.
The symptom is a problem that the access point cannot be found when
Factory Reset is executed with the product.
8) When the customer connects iPod/USB and MediaServer to the product, and
music is played, the product was a specification that do an unnecessary access
to the Last.fm server. Therefore, when the failed occurs on the Last.fm server
side, the failure of the stop of playing of the music of iPod/USB and
MediaServer might occur.
The symptom is a problem that when the failed occurs on the Last.fm server
side, the failure of the stop of playing of the music of iPod/USB and
MediaServer might occur.
9) When the black hole router was present between the Internet environment of
the AV receiver and DPMS server (including the Internet service provider
side equipment), the AV receiver might fail in the firmware update. (The
black hole router is a router that destroy it when the divided IP packet cannot
be forwarded.)
10) The customer cannot change the Audyssey setting via the Web menu from
personal computer. Dynamic EQ and the Dynamic Vol setting cannot be
reflected in Web mainly because they are "Not available".
The symptom is a problem that the customer cannot change the Audyssey
setting via the Web menu.
11) When the customer plays a specific file by USB Memory device, the track
name is changed one after another in 25 seconds. (File that the number (01
and 02, etc.) are recorded at the beginning of the name.)
The symptom is a problem that the track name is changed one after another
in 25 seconds.
(USA only )
12) When the WAV file or the Flac file in USB memory device connected to the
USB terminal is played, the title of the previous music is displayed in the
display even if the playback music switches to the next music. Or, the Album
art does not change.
The symptom is a problem that the title of playback music is not correctly
displayed.
13) Even if the customer sets "Tone Control" to "ON" with the WEB control
setting screen of the AV receiver, and the numerical value of Bass or Treble
is changed, the AV receiver doesn't reflect a set value.
The symptom is a problem that the AV receiver cannot set Bass or Treble
from the WEB control.
(USA only )
14) If the customer inserted the iPod classic to USB-A terminal on AV Receiver
with standby mode (over 8 hours or more), when the customer turns on the
power of AV receiver, the AV receiver cannot connect to the iPod again.
The symptom is a problem that the AV receiver cannot connect to the iPod
when the customer connects iPod classic and turns on the power of AV
receiver.
15) When Dynamic Volume is turned off with the AMX command, Dynamic EQ
is also disabled.
16) The display of Energy Info doesn't disappear even after the lapse of time,
when the customer sets Info to OFF by "Setup > Video > On Screen Display"
and then the ECO setting is changed to "On" or "Auto" or "Off" with the ECO
button of the remote control unit.
The symptom is a problem that the product will continue to display the
Energy Info.
