Uscita la tanto attesa release ufficiale:
"Production 070310-
*
Adds reinterlacing for 480p and 576p sources. This can provide dramatic improvements to a picture that has been poorly deinterlaced prior to coming into the Radiance. Reinterlacing also allows for taking in 480p/576p movies and going out at 24/48/72Hz. The new command is under Input:Video Setup:RES:Control:Reinterlace. With this command you can "allow" or "disallow" quick remote key control for a particular resolution as well as turn it on/off. If "Reinterlace <> Keys" are allowed the left/right arrow buttons on the remote can then be used to control reinterlacing. The left arrow can toggle reinterlacing on/off and the right arrow toggles the field order. Depending on how the picture was deinterlaced, the field order may or may not be important but it can be quickly toggled to see if there is any difference. Discrete commands are available for reinterlacing control as well and they are "menu 0940"=off, "menu 0941"=on, "menu 0942" = toggle field order. A new rs232 command was added to arm the right/left arrow keys for reinterlace control, it is "ZY523X<CR>" where X='0' disallows, X='1' allows, X='2' allows with onscreen messages. The discrete reinterlace commands also work as rs232 commands ("M0940","M0941","M0942"). An rs232 command was added for reinterlacing status, "ZQI17", which returns "!I17X,Y,Z" where X = 1/0 (on/off) , Y = 1/0 (allow/disallow) for <> keys, Z= 1/0 (active / not active) to indicate whether reinterlacing is taking place.
*
Improved PAL deinterlacing and now allows "film only" deinterlacing mode to use settings under "Enhance" menu for 50Hz sources.
*
Added direct command to set output sync polarity, "menu 01XY". X=0/1 (-/+ Horiz polarity), Y=0/1 (-/+ Vert polarity). Both outputs set together. Use menu to set them different from one another.
*
Upped maximum output pixel clock settable to 156 Mhz (useful for CRT displays). (Note: XD+ already has a higher settable pixel clock)
*
Bugfixes: Bugfix for film mode sometimes not getting set when changing memories. Bugfix of 1080i-50 component zoom settings causing incorrect cropping on left side. Loss of input video under rare circumstances fixed. Loss of output video (depending on configuration) on output 2 fixed. Fix for inability to alter rate match settings on inactive config. Input changes to non-hdcp sources were sped up. Copying ouput aspect from one output config to another fixed. Copying black/white in output config fixed. "
Avanti con i test!
).
