Nuovi Proiettori 3D da Optoma

[Deimos7777]

Nuovi proiettori 1080p 3D da Optoma: HD 33 , HD 8300

DOvrebbero essere messi in commercio tra fine Luglio e Agosto


Movies are certainly a big part of the summer entertainment mix. 3D movies? Even better. However, sticky floors, crowds and theater texting don't have to be an integral part of the summer movie experience. Optoma is hoping to entice more movie fans to stay at home this summer, with three new projector releases, including their first full HD 1080p projectors to offer 3D capabilities.
With more 3D TVs flooding the market, it's only natural that projector manufacturers would follow suit. Optoma was an early seller of 3D-capable DLP projectors, but these were all limited to 720p (1280x720 pixels) resolution. This summer Optoma will add two more options to the 3D line-up, and this time they're offering full HD resolution (1920x1080 pixels) projectors with 3D capabilities: the new models are the HD8300 and HD33.
Optoma's HD8300 features the latest 1080p DarkChip3 DLP technology from Texas Instruments, as well as a 30,000:1 contrast ratio with DynamicBlack, 1300 lumens of brightness, True 10-Bit Full HD processing and 3-Stage Optoma Image processing. Promising over 1.07 billion colors, this projector also has the PureMotion2 processing engine, which boasts super-smooth, judder-free images for a better overall viewing experience.
Because this is a 1080p full HD 3D-ready projector, it's compatible with 1080p 3D, 720p 3D, HD (1080i/p, 720p), EDTV (480p/576p), NTSC, PAL, and SECA. The company also lists the projection distance as 4.9 to 32.8 feet, delivering images from 29.8 to 297.3 inches. Optoma says that the HD8300 should start shipping by mid-July



In August, Optoma says they will release the HD33 (or HD3300 - model number details are still a little sketchy). This model also features a 1080p DLP imaging engine and will support 3D sources, but initial specs say that 3D support will be limited to 720p resolution. The HD33 will be compatible with NTSC, PAL, SECAM, SDTV (480i), EDTV (480p), and HDTV (720p, 1080i/p) formats. The HD33 can also do 120Hz Frame Sequential 3D for resolutions up to 720p and 60Hz Field Sequential 3D for resolutions up to 480i -- with compatible 3D glasses, of course.
Other HD33 features include 1800 ANSI lumens of brightness and contrast ratio of 4000:1. This one is also rated for a slightly larger maximum image than the HD8300 -- up to 301.1 inches -- but you'll need a lot of space (and a very dark room and/or high grain screen) to come anywhere close to that.
Optoma says that they are also planning to offer new active shutter RF 3D glasses timed with these two projector introductions. Expect info on those, as well as HD8300 and HD33 pricing, to be announced soon



Edit : Fonte www.today3d.com news del 13 Giugno 2011

[nemo30]

La fonte?

[Cetto_La_Qualunque]

da quando ho provato il nuovo cinema 3D Imax di Pioltello ho capito che mi interessa solo il 3D passivo ...

[josephdan]

Mooolto interessante l'83!!
Il range di prezzo dovrebbe essere quello del Sony vW30 probabilmente (sui 3000 euro), si comincia ad allargare la scelta sul 3D, e notevolmente...
Peccato monti un DMD 0.65 e non il magico 0.95....
Inoltre la velocità dei chip dlp dovrebbe assicurarci ghosting e cross talk... free!!
E ha pure il motionflow...

[josephdan]

Info sul 3300:

http://marketing.optomausa.com/PDFs/..._Datasheet.pdf

Sembrerebbe di capire piena risoluzione (1080p) anche per contenuti 3D!?

Mentre il 33:

http://marketing.optomausa.com/PDFs/..._Datasheet.pdf

In 3D a 720p come risoluzione massima.

Fonte:

http://www.hdfever.fr/2011/06/14/opt...d3300-et-hd33/

[stazzatleta]

nient lens shift...

[josephdan]

nient lens shift:

No, è presente solo solo sull'8300.
D'altra parte il 33 e il 3300 suppongo siano piuttosto economici...
Peccato che pare il 3300 il più interessante tra i due perchè capace di risoluzione fullhd in 3D e dotato di motionflow sarà commercializzato solo in USA, mentre in europa il 33 (decisamente meno appetibile)

[N. D'Agostino]

Dati HD 8300/83

PureMotion2 processing ensures images are smooth and judder-free for greater realism
Latest 1080p DarkChip3 DLP® technology by Texas Instruments Features full lens shift for flexible projector placement
1080P 3D ready for high definition 3d source
1300 lumens and a 30,000:1 contrast ratio with DynamicBlack
Full function, backlit remote with discrete IR codes and secondary convenience remote
ISF Certified Calibration Controls, with Day and Night modes

Display Technology
Single 0.65” 1080p DarkChip3™
‘DLP Technology by Texas
Instruments
Brightness
1300 ANSI Lumens
Resolution
Native 1080p (1920 x 1080)
Contrast Ratio
TBD ANSI Contrast
2000:1 (Full On/Full Off)
30,000:1 (Max) w/ DynamicBlack
Image Processing
True 10-Bit Full HD Processing
3 Stage Optoma Image Processing
and 9-step manual setting
Iris Control
DynamicBlack Technology
Lamp Life and Type
4000/3000 Hours (STD/Bright)
280W P-VIP
Throw Ratio (Distance/Width)
1.49 to 2.28
Projection Distance
4.9’ to 32.8’ (1.5 to 10m)
Image Size (Diagonal)
29.8” to 297.3” (0.76 to 7.55m)
Uniformity
85%
Noise Level
28dB
Displayable Colors
1.07 Billion
Lens Shift
Vertical 105~115%, Horizontal ±15%
Projection Lenses
Standard: F= 2.45-2.9, f =
22.18-33.27 mm, 1.5x Manual
Zoom and Focus
Aspect Ratio
Native 16:9, Fully Automatic 2.35:1
with Anamorphic Lens
Keystone Correction
±5° Vertical
Security
Kensington® Lock Port
Projection Method
Front, Rear, Ceiling Mount, Table Top
User Controls
Complete On-Screen Menu
Adjustments in 22 Languages
Remote Control
Backlit Remote Control with Discrete
IR Codes for Power and Source
Selection, Magnetically Attached
Convenience Remote
Computer Compatibility
HD, UXGA, SXGA+, WXGA, SXGA,
XGA, SVGA, VGA Resized, VESA, PC
and Macintosh Compatible
Video Compatibility
1080P 3D, 720p 3D, HD (1080i/p,
720p), EDTV (480p/576p), NTSC,
PAL, SECAM
Horizontal Scan Rate
15.3 to 91.1 kHz
Vertical Scan Ratge
25 to 85 Hz, 120Hz
Weight
18.5 lbs (8.4 kg)
Dimensions (W x H x D)
19.3” x 7.6” x 14.6”
(490 x 194 x 371mm)
Power Supply
AC Input 100-240V, 50-60Hz,
Auto-Switching
Power Consumption
385 Watts (Bright), 315 Watts (STD),
<1 Watt (Standby)
Operating Temperature
41 to 95°F (5 to 35°C), 85% Max
Humidity, Adjustable Fan Speed for
High Altitude Application
Standard Accessories
AC Power Cord, Composite Video
Cable, Remote Control, Secondary
Convenience Remote, Batteries for
Remote, Lens Cap, User’s Manual,
Quick Start Card, and Warranty Card
Optional Accessories
Ceiling Mount, HDMI Cable, VGA Cable,
S-Video Cable, Component Cable, Lens
Option, Anamorphic Lens Kit, and
Panoview™ Series Screens
Warranty
3 Years Optoma Express Replacement
Service, 1 Year on Lamp
UPC
TBD
Accessory Part Numbers
Lamp: TBD
Remote: TBD
Convenience Remote: TBD
Mount: TBD
Anamorphic Lens Kit: BX-AL133B

[Rosario]

LINK
Questa prima recensione del piccolo HD33 è molto buona , direi ottima in relazione al prezzo.

[stazzatleta]

l'unica vera mancanza (purtroppo grave per me) è il lens shift.
per il resto, a quel prezzo, sembra essere un buon proiettore.

c'è anche il pure motion, che però non ho mai visto in funzione

[Rosario]

Già , pure io non posso a meno del lens shift...
Per chi non ha tale necessità sarà un ottimo acquisto.

[josephdan]

Recensioni dell'HD33:

http://www.projectorreviews.com/optoma/hd33/index.php

http://www.projectorcentral.com/opto...tor_review.htm

[josephdan]

Caratteristiche dell' HD83:

http://www.optomausa.com/products/detail/HD8300

http://www.aboutprojectors.com/pdf/o...8300-specs.pdf

I lumen sono 1500, e il lens shift sembra avere un buon range, Rosario....

Resta da vedere se il Pure Motion (FI) sia attivabile sui contenuti 3D (sull'HD33 funziona solo sul 2D).

[josephdan]

Scaricato il manuale, il pure motion purtroppo non è attivabile sui contenuti a 120Hz, quindi col 3D non si può usufruirne...

Interessante la funzione superwide che consente di visualizzare contenuti 21 9 senza barre orizzontali....

"SuperWide
SuperWide is a feature that uses a special 2.0:1 aspect ratio screen enabling both 16:9 and 2.35:1 aspect ratio movies to be shown without black bars at the top and bottom of the screen.
Off: Your desired aspect ratio can be selected 4:3, 16:9, LBX and Native.
Auto: To solve the differences of the film formats, the option can keep the format in the same ratio.
On (16:9): Only 16:9 format can be selected.
On (2.35:1) Only 2.35:1 format can be selected."

[stefanelli73]

E' una funzione presente anche sui precedenti OPTOMA sia HD82 che 86, quest'ultimo da me posseduto fino a poco tempo fà e ti assicuro che non serve a niente...sinceramente dalla specifiche mi sembrano gli stessi apparecchi degli anni precedenti con in più implementato il 3d, per cui se fossi in te andrei su altri lidi....