-
Sabato 14 febbraio da Audio Quality partirà un roadshow che porterà il nuovo proiettore DLP 4K trilaser Valerion VisionMaster Max in giro per l'Italia e che toccherà Roma, Genova, Milano, Napoli, Padova e Udinee forse anche Bari e Torino. Maggiori info a questo indirizzo
HTPC e SKY, la guida per non perdersi...
- Autore discussione provolonesiculo
- Data d'inizio
eduardnort
New member
Ci ho provato ma non ci sono ancora riuscito
ho comunque una card vecchia 0001 mi dicevate che ci sono metodi migliori cosa devo fare? Ho messo newcs configurato il file xml e mi dice che la carta va sulla porta 15050 però quando vado da dvbviewer a vedere acamd anche lui configurato con i parametri nel cardconfig gli stessi messi in newcs e con localhost mi dice no smartcard interface definited
che devo fare ho sbagliato qualcosa?
Se c'è un metodo più facile per le card 0001 mi potete dire per favore.
Grazie
ho comunque una card vecchia 0001 mi dicevate che ci sono metodi migliori cosa devo fare? Ho messo newcs configurato il file xml e mi dice che la carta va sulla porta 15050 però quando vado da dvbviewer a vedere acamd anche lui configurato con i parametri nel cardconfig gli stessi messi in newcs e con localhost mi dice no smartcard interface definited
che devo fare ho sbagliato qualcosa?
Se c'è un metodo più facile per le card 0001 mi potete dire per favore.
Grazie
eduardnort
New member
Niente non ne vengo a capo
Qualcosa non va e non riesco a capire cosa, come faccio a far funzionare NDScam con dvbviewer? Ho letto che serve softcsa ma non ho capito come combinarli, resta il fatto che non riesco a vedere niente purtroppo, sul mio vecchio dreambox era così facile emu nds e via quì sto impazzendo.
Grazie comunque.
Qualcosa non va e non riesco a capire cosa, come faccio a far funzionare NDScam con dvbviewer? Ho letto che serve softcsa ma non ho capito come combinarli, resta il fatto che non riesco a vedere niente purtroppo, sul mio vecchio dreambox era così facile emu nds e via quì sto impazzendo.
Grazie comunque.
eduardnort
New member
Newcs docrebbe essere ok
è acamd che non va mi dice no smart card interface defined, e poi su dvbviewer mi dice al cambio di canale hardware non disponibile. ho sbagliato qualcosa con acamd ho messo l'ultima versione la 0.6.0.3
è acamd che non va mi dice no smart card interface defined, e poi su dvbviewer mi dice al cambio di canale hardware non disponibile. ho sbagliato qualcosa con acamd ho messo l'ultima versione la 0.6.0.3
gandalf
New member
intanto non usare le ultimissime versioni visto che un sacco di gente ha problemi.
Prova la 0.6.0.0 o la 0.6.0.1. Anche la 0.5.9.x mi andava bene.
Poi su DVBviewer, sulle proprietà della scheda sat devi spuntare "Ricevitore con CI" o qualcosa del genere.
infine se newcs ti pare apposto e riesce a leggere la card e a far partire il server newcamd, allora ti resta solo da controllare che la stringa di connessione su acamd sia giusta.
Prova la 0.6.0.0 o la 0.6.0.1. Anche la 0.5.9.x mi andava bene.
Poi su DVBviewer, sulle proprietà della scheda sat devi spuntare "Ricevitore con CI" o qualcosa del genere.
infine se newcs ti pare apposto e riesce a leggere la card e a far partire il server newcamd, allora ti resta solo da controllare che la stringa di connessione su acamd sia giusta.
EUROSPORT HD
Volevo ringraziare PynkyZ che in questa discussione ha fatto presente che il decoder di Sky occupa dei trasponder anche se risulta essere in stand-by:E' VERISSIMO !!! Infatti a causa di questo avendo una sola calata dalla parabola ed avendo collegato pc e decoder sky tramite splitter mi capitava che il trasponder di EUROSPORT HD non fosse visibile dal pc solo perchè lasciavo il decoder in stand-by.Ero impazzito cambiando mille configurazioni senza successo...qualcuno mi aveva anche detto che con DVB Viewer non si può vedere EUROSPORT HD:NON E' VERO !!!!
Se si ha una sola calata dalla parabola e si è collegati tramite splitter bisogna necessariamente tenere completamente spento il decoder di Sky.Spero di essere stato utile a chi come mè ha questo tipo d'installazione.
Volevo ringraziare PynkyZ che in questa discussione ha fatto presente che il decoder di Sky occupa dei trasponder anche se risulta essere in stand-by:E' VERISSIMO !!! Infatti a causa di questo avendo una sola calata dalla parabola ed avendo collegato pc e decoder sky tramite splitter mi capitava che il trasponder di EUROSPORT HD non fosse visibile dal pc solo perchè lasciavo il decoder in stand-by.Ero impazzito cambiando mille configurazioni senza successo...qualcuno mi aveva anche detto che con DVB Viewer non si può vedere EUROSPORT HD:NON E' VERO !!!!
Se si ha una sola calata dalla parabola e si è collegati tramite splitter bisogna necessariamente tenere completamente spento il decoder di Sky.Spero di essere stato utile a chi come mè ha questo tipo d'installazione.
Ultima modifica:
Roberto65
New member
Io sono diventato idiota perché la ricerca canali di DVB Viewer non dava i risultati voluti. Alcuni canali venivano trovati, altri no. Mi era stato detto di aggiornare la lista delle frequenze dei transponder ma il problema era il decoder SKY in standby al piano sopra! :muro:
eduardnort
New member
Ancora niente purtroppo
Questo è quello che mi scrive newcs (1.62)
[ 20:01:02 ] [ Box detect ] Windows Vista Build 6001
[ 20:01:02 ] [ Config ] Irdeto EMM mode 0 SET on reader Phoenix on Com1
[ 20:01:02 ] [ Config ] Option <blockc0> for device 0 (Phoenix on Com1) not present, defaulting to N
O
[ 20:01:02 ] [ Config ] Value in <ipk> for device 0 (Phoenix on Com1) is INVALID, skipping...
[ 20:01:02 ] [ Config ] Value in <ucpk> for device 0 (Phoenix on Com1) is INVALID, skipping...
[ 20:01:02 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000
[ 20:01:02 ] [ Config ] COM1 ECM priority: round
[ 20:01:02 ] [ Chameleon2 ] Adding name myname on destination localhost (Realm: myShares) on port 12
34 - 0p1f97448 [ op ptr 0p1f9dfe8 ]
[ 20:01:02 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 20:01:02 ] [ EMM Cache ] Initialising dynamic Cache
[ 20:01:02 ] [ ECM Cache ] Initialising dynamic Cache
[ 20:01:02 ] [ Loader ] Starting Telnet on port 1001
[ 20:01:02 ] [ Loader ] Started HTTP-server on port: 8080
[ 20:01:02 ] [ Loader ] Reader type 2 on node COM1
[ 20:01:02 ] [ Phoenix ] Opening device COM1
[ 20:01:02 ] [ Phoenix ] Setting parity to NONE on node COM1
[ 20:01:02 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 20:01:02 ] [ Phoenix ] Setting baud to 9600
[ 20:01:04 ] [ ATR ] T=1 1etu=25.23us Guardtime:15etu CWT:43etu BWT:3851etu WWT:38400etu
[ 20:01:04 ] [ ATR ] Historical bytes: [80] [04] 0 [B0] [04] [D0] i [FF] J P p [00] [00] I T
[ 20:01:04 ] [ Loader ] Init NDS card
[ 20:01:04 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 20:01:04 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 20:01:04 ] [ Phoenix ] Setting baud to 38400
[ 20:01:06 ] [ Keyman ] Adding key C24*** type 0 on Provider 000000 for caid 0919 ID=0
[ 20:01:06 ] [ Keyman ] Adding key C24*** type 1 on Provider 000000 for caid 0919 ID=0
[ 20:01:07 ] [ Loader ] Card 0919 on port COM1 ready
[ 20:01:07 ] [ Loader ] Starting Newcamd Server on port 15050
[ 20:01:07 ] [ Newcamd ] Newcamd thread Server started on port 15050
[ 20:01:08 ] [ Chameleon2 ] Server started on port 1234 for realm myShares
[ 20:01:08 ] [ Chameleon2 ] selectserver: new connection from 127.0.0.1 on socket 1416
[ 20:01:08 ] [ Chameleon2 ] Connected to localhost on port 1234 on Handle 1404
[ 20:01:08 ] [ Chameleon2 ] Adding user myname to UserBase on handle 1404 (Mode 0)
E mi sembra che sia ok no?
Questo è quello che mi scrive newcs (1.62)
[ 20:01:02 ] [ Box detect ] Windows Vista Build 6001
[ 20:01:02 ] [ Config ] Irdeto EMM mode 0 SET on reader Phoenix on Com1
[ 20:01:02 ] [ Config ] Option <blockc0> for device 0 (Phoenix on Com1) not present, defaulting to N
O
[ 20:01:02 ] [ Config ] Value in <ipk> for device 0 (Phoenix on Com1) is INVALID, skipping...
[ 20:01:02 ] [ Config ] Value in <ucpk> for device 0 (Phoenix on Com1) is INVALID, skipping...
[ 20:01:02 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000
[ 20:01:02 ] [ Config ] COM1 ECM priority: round
[ 20:01:02 ] [ Chameleon2 ] Adding name myname on destination localhost (Realm: myShares) on port 12
34 - 0p1f97448 [ op ptr 0p1f9dfe8 ]
[ 20:01:02 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 20:01:02 ] [ EMM Cache ] Initialising dynamic Cache
[ 20:01:02 ] [ ECM Cache ] Initialising dynamic Cache
[ 20:01:02 ] [ Loader ] Starting Telnet on port 1001
[ 20:01:02 ] [ Loader ] Started HTTP-server on port: 8080
[ 20:01:02 ] [ Loader ] Reader type 2 on node COM1
[ 20:01:02 ] [ Phoenix ] Opening device COM1
[ 20:01:02 ] [ Phoenix ] Setting parity to NONE on node COM1
[ 20:01:02 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 20:01:02 ] [ Phoenix ] Setting baud to 9600
[ 20:01:04 ] [ ATR ] T=1 1etu=25.23us Guardtime:15etu CWT:43etu BWT:3851etu WWT:38400etu
[ 20:01:04 ] [ ATR ] Historical bytes: [80] [04] 0 [B0] [04] [D0] i [FF] J P p [00] [00] I T
[ 20:01:04 ] [ Loader ] Init NDS card
[ 20:01:04 ] [ Phoenix ] Setting parity to ODD on node COM1
[ 20:01:04 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 20:01:04 ] [ Phoenix ] Setting baud to 38400
[ 20:01:06 ] [ Keyman ] Adding key C24*** type 0 on Provider 000000 for caid 0919 ID=0
[ 20:01:06 ] [ Keyman ] Adding key C24*** type 1 on Provider 000000 for caid 0919 ID=0
[ 20:01:07 ] [ Loader ] Card 0919 on port COM1 ready
[ 20:01:07 ] [ Loader ] Starting Newcamd Server on port 15050
[ 20:01:07 ] [ Newcamd ] Newcamd thread Server started on port 15050
[ 20:01:08 ] [ Chameleon2 ] Server started on port 1234 for realm myShares
[ 20:01:08 ] [ Chameleon2 ] selectserver: new connection from 127.0.0.1 on socket 1416
[ 20:01:08 ] [ Chameleon2 ] Connected to localhost on port 1234 on Handle 1404
[ 20:01:08 ] [ Chameleon2 ] Adding user myname to UserBase on handle 1404 (Mode 0)
E mi sembra che sia ok no?
eduardnort
New member
Lancio poi dvbviewer
Vado poi a lanciare dvbviewer con acamd 0.58 e mi scrive le seguenti cose, sembra che funzioni tutto mette anche la key però non si vede niente resta schermo nero si vede solo sky inside che è in chiaro
20:32:59: cardclients: registering cardclient Camd35
20:33:01: systems: registering CA system Cardclient, pri -15, ident 1000
20:33:01: cardclients: registering cardclient Feynman
20:33:01: cardclients: registering cardclient Gbox
20:33:01: cardclients: registering cardclient Newcamd
20:33:01: cardclients: registering cardclient Radegast
20:33:01: systems: registering CA system SC-Irdeto, pri -10, ident 1001
20:33:01: feature: using feature SMARTCARD
20:33:01: registering Irdeto smartcard (id 497264**)
20:33:01: systems: registering CA system SC-Seca, pri -10, ident 1002
20:33:01: registering Seca smartcard (id 536563**)
20:33:01: systems: registering CA system SC-Viaccess, pri -10, ident 1003
20:33:01: registering Viaccess smartcard (id 566961**)
20:33:01: ACamd v0.5.0.8
20:33:01: loaders: registering loader KEY
20:33:01: Engine DVB Viewer Pro
20:33:01: ** registered systems:
20:33:01: ** SC-Viaccess (pri -10)
20:33:01: ** SC-Seca (pri -10)
20:33:01: ** SC-Irdeto (pri -10)
20:33:01: ** Cardclient (pri -15)
20:33:01: loading cardclient config from C:\Program Files\DVBViewer\Plugins\cardclient.conf
20:33:01: now using protocol version 525 (cdLen=8)
20:33:01: hostname=127.0.0.1 port=15050 emm=1 emmCaids 0604/ffff
20:33:01: Newcamd: username=dummy password=dummy key=010102030205060809101112****
20:33:01: netwatch up
20:33:01: Netwatcher thread started (tid=100491888)
20:33:01: connecting to 127.0.0.1:15050/tcp (127.0.0.1)
20:33:01: Newcamd: CaID=1800 admin=1 srvUA=0000000000000000 provider
20:33:01: client 'Newcamd' ready
20:33:01: now using protocol version 525 (cdLen=8)
20:33:01: hostname=127.0.0.1 port=15050 emm=1 emmCaids 0000/0000
20:33:01: Newcamd: username=dummy password=dummy key=010102030205060809101112****
20:33:01: netwatch up
20:33:01: connecting to 127.0.0.1:15050/tcp (127.0.0.1)
20:33:01: Newcamd: CaID=1800 admin=1 srvUA=0000000000000000 provider
20:33:01: client 'Newcamd' ready
20:33:01: created 2 client(s)
20:33:01: loading smartcard data from C:\Program Files\DVBViewer\Plugins\smartcard.conf
20:33:01: loading smartcard data from C:\Program Files\DVBViewer\Plugins\smartcard.conf
20:33:01: COM1: open serial port
20:33:01: COM1: open failed: No such file or directory
20:33:01: failed to open serial port COM1
20:33:01: COM1: shutting down
20:33:01: COM1: shutdown done
20:33:01: no smartcard interface defined!
20:33:01: Ch: 304 - SKY Inside
20:33:01: Incomming PackageSize [188]
20:33:01: 0x0130 0x0DF3 0x0919 0x00000000 0x0000 0x0DAB 11011010
20:33:01: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:01: cc: cc-loop ProcessEMM 0x0919
20:33:01: [00] Stream enabled for ECM pid 0x0500...
20:33:01: [01] Stream enabled for ECM pid 0x050C...
20:33:01: [02] Stream enabled for ECM pid 0x0504...
20:33:01: [03] Stream enabled for ECM pid 0x0507...
20:33:02: [04] Stream enabled for ECM pid 0x0510...
20:33:02: [05] Stream enabled for ECM pid 0x050E...
20:33:02: [06] Stream enabled for ECM pid 0x0506...
20:33:02: [07] Stream enabled for ECM pid 0x0505...
20:33:02: [08] Stream enabled for ECM pid 0x050A...
20:33:21: Ch: 1108 - SKY Sport 1 (ita)
20:33:21: 0x0454 0x2AA8 0x0919 0x00000000 0x0650 0x012D 11011010
20:33:21: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:21: cc: cc-loop ProcessEMM 0x0919
20:33:21: [00] Newcamd: ECM Proccessed (0.001)
20:33:21: [00] SendDCW Even: 2AA800D200000000:
20:33:21: [00] Newcamd: ECM Proccessed (0.001)
20:33:21: [00] Newcamd: card was not able to decode the channel
20:33:21: [01] Stream enabled for ECM pid 0x0642...
20:33:21: [02] Stream enabled for ECM pid 0x0644...
20:33:21: [03] Stream enabled for ECM pid 0x0641...
20:33:21: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:21: cc: cc-loop ProcessECM 0x0919
20:33:21: [00] Newcamd: ECM Proccessed (0.001)
20:33:21: [00] Newcamd: card was not able to decode the channel
20:33:21: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:21: cc: cc-loop ProcessECM 0x0919
20:33:21: [00] Newcamd: ECM Proccessed (0.000)
20:33:21: [00] Newcamd: card was not able to decode the channel
20:33:21: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:21: cc: cc-loop ProcessECM 0x0919
20:33:21: [00] Newcamd: ECM Proccessed (0.000)
20:33:21: [00] Newcamd: card was not able to decode the channel
20:33:21: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:21: cc: cc-loop ProcessECM 0x0919
20:33:21: [00] Newcamd: ECM Proccessed (0.001)
20:33:21: [00] Newcamd: card was not able to decode the channel
20:33:21: [00] ECM Error count > [4] times
20:33:21: [00] Disable ECM for pid: [0x0650] no decoding posible
20:33:21: [04] Stream enabled for ECM pid 0x066C...
20:33:21: [05] Stream enabled for ECM pid 0x066D...
20:33:22: [06] Stream enabled for ECM pid 0x066B...
20:33:22: [07] Stream enabled for ECM pid 0x065A...
20:33:57: Ch: 1108 - SKY Sport 1 (ita)
20:33:57: 0x0454 0x2AA8 0x0919 0x00000000 0x0650 0x012D 11011010
20:33:57: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:57: cc: cc-loop ProcessEMM 0x0919
20:33:57: ECM: Start --------
81 70 86 00 00 01 14 93 14 94 35 03 98 68 5B 81 21 84 01 00 01 01 02 **
FF 00 0C 6D 7F 0A 75 D6 B8 15 2F 1A 78 09 00 00 7E 0A 23 26 3A 36 FF **
7F E5 C2 0E 90 53 C0 02 60 24 E3 FF 52 51 22 24 68 84 F6 AB 70 A6 3B **
13 F9 7B 2A B1 36 5D EF 3E 15 F9 AF A3 E5 62 8D 7A 28 32 14 72 7B 41 **
62 CC 82 7D CF C5 0F F0 6B 1B 72 9D FA 22 3F AD 2F E8 8D F2 1D CA 1E **
36 DB 79 F1 B3 B6 08 67 E8 5B E3 9D 28 61 74 89 **
20:33:57: ECM: End ----------
20:33:57: [00] Newcamd: ECM Proccessed (0.002)
20:33:57: [00] SendDCW Even: 2AA800D200000000:
20:33:57: [01] Stream enabled for ECM pid 0x0642...
20:33:57: [02] Stream enabled for ECM pid 0x0644...
20:33:57: ECM: Start --------
80 70 86 00 00 01 14 93 14 94 35 03 99 D1 AE 81 21 84 01 00 01 01 02 **
FF 00 C9 6D 7F 0A 38 39 EC F5 BC A4 AF B3 00 00 7E 0A 86 21 77 D9 E6 **
A2 4D 7B FB 90 53 C0 02 0B 12 A1 CF 6E CF BA A8 89 7C 0C 63 B0 49 53 **
DC 10 28 85 7F 20 82 77 BE A4 3B C5 69 8D 3F D2 72 07 58 50 C5 AC 8F **
40 57 06 8A E1 A8 03 78 9C AF FD A0 61 44 48 31 E9 A6 D6 93 CA 40 E7 **
EE 47 C2 CF EA BD 2F 3D 7E 8D CB 9D 8F E7 51 A6 **
20:33:57: ECM: End ----------
20:33:57: [00] Newcamd: ECM Proccessed (0.001)
20:33:57: [00] Newcamd: card was not able to decode the channel
20:33:57: [03] Stream enabled for ECM pid 0x0641...
20:33:57: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:57: cc: cc-loop ProcessECM 0x0919
20:33:57: ECM: Start --------
80 70 86 00 00 01 14 93 14 94 35 03 9A 92 87 81 21 84 01 00 01 01 02 **
FF 00 64 6D 7F 0A C5 38 24 C1 1B 9B 86 BC 00 00 7E 0A C8 0B 62 03 D4 **
45 84 38 D2 90 53 C0 02 B2 17 44 B2 F8 96 7D 45 58 28 F0 B6 F1 96 51 **
30 3C 82 03 1A D3 3B 37 60 83 70 9E 3E 82 A6 A8 43 9E 72 66 92 27 C0 **
18 09 82 55 BF FB E9 2E 7E 79 B8 69 14 9F EC 63 72 2B 4A 36 77 B7 8F **
68 80 4B 13 3A 69 83 DA 5E 28 E0 3F D1 C7 EB 64 **
20:33:57: ECM: End ----------
20:33:57: [00] Newcamd: ECM Proccessed (0.000)
20:33:57: [00] Newcamd: card was not able to decode the channel
20:33:57: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:57: cc: cc-loop ProcessECM 0x0919
20:33:57: ECM: Start --------
81 70 86 00 00 01 14 93 14 94 35 03 9B 29 E3 81 21 84 01 00 01 01 02 **
FF 00 58 6D 7F 0A CC A3 17 6E 5D 0A CA ED 00 00 7E 0A E9 9F B9 50 63 **
D1 75 83 B6 90 53 C0 02 E2 AC 77 33 E3 98 48 72 08 87 71 4A E1 24 65 **
8F 4E 5D 9A 69 0A 51 B7 5F 9E 40 0B 92 41 F8 E6 A5 03 FA 82 25 02 8D **
46 33 B4 5A E3 97 F0 E2 0D 5A 7D DE BA 3C 01 5F 11 D9 03 BB D7 D3 34 **
2D 01 31 18 E9 72 0E 6A BB BE B3 FA 44 77 7A 1B **
20:33:57: ECM: End ----------
20:33:57: [00] Newcamd: ECM Proccessed (0.000)
20:33:57: [00] Newcamd: card was not able to decode the channel
20:33:57: [04] Stream enabled for ECM pid 0x066C...
20:33:57: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:57: cc: cc-loop ProcessECM 0x0919
20:33:57: ECM: Start --------
80 70 86 00 00 01 14 93 14 94 36 03 A1 9F BE 81 21 84 01 00 01 01 02 **
FF 00 B0 6D 7F 0A 03 A3 20 06 BA 06 D3 91 00 00 7E 0A 50 12 9F DB 8E **
3C D7 35 EB 90 53 C0 02 B3 61 00 27 95 DC 79 88 BE 39 31 A2 A6 D0 01 **
C3 09 D7 03 9B 10 77 29 C8 58 CC 3C 50 41 FF 4D 50 D9 69 D3 40 4B 49 **
0F B7 6B 07 25 BA 28 F1 49 1E 8B 1E B6 FA 97 CA BD 0B 95 B3 5E AB AF **
74 34 4B 12 42 FC 22 9D 3C 08 F2 AA 09 C4 40 F1 **
20:33:57: ECM: End ----------
20:33:57: [00] Newcamd: ECM Proccessed (0.000)
20:33:57: [00] Newcamd: card was not able to decode the channel
20:33:57: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:57: cc: cc-loop ProcessECM 0x0919
20:33:57: ECM: Start --------
80 70 86 00 00 01 14 93 14 94 35 03 99 D1 AE 81 21 84 01 00 01 01 02 **
FF 00 C9 6D 7F 0A 38 39 EC F5 BC A4 AF B3 00 00 7E 0A 86 21 77 D9 E6 **
A2 4D 7B FB 90 53 C0 02 0B 12 A1 CF 6E CF BA A8 89 7C 0C 63 B0 49 53 **
DC 10 28 85 7F 20 82 77 BE A4 3B C5 69 8D 3F D2 72 07 58 50 C5 AC 8F **
40 57 06 8A E1 A8 03 78 9C AF FD A0 61 44 48 31 E9 A6 D6 93 CA 40 E7 **
EE 47 C2 CF EA BD 2F 3D 7E 8D CB 9D 8F E7 51 A6 **
20:33:57: ECM: End ----------
20:33:57: [00] Newcamd: ECM Proccessed (0.001)
20:33:57: [00] Newcamd: card was not able to decode the channel
20:33:57: [00] ECM Error count > [4] times
20:33:57: [00] Disable ECM for pid: [0x0650] no decoding posible
20:33:57: [05] Stream enabled for ECM pid 0x066D...
20:33:57: [06] Stream enabled for ECM pid 0x066B...
20:33:57: [07] Stream enabled for ECM pid 0x065A...
Non riesco a capire dove può stare il problema?
Grazie per la vostra pazienza. Ed.
Vado poi a lanciare dvbviewer con acamd 0.58 e mi scrive le seguenti cose, sembra che funzioni tutto mette anche la key però non si vede niente resta schermo nero si vede solo sky inside che è in chiaro
20:32:59: cardclients: registering cardclient Camd35
20:33:01: systems: registering CA system Cardclient, pri -15, ident 1000
20:33:01: cardclients: registering cardclient Feynman
20:33:01: cardclients: registering cardclient Gbox
20:33:01: cardclients: registering cardclient Newcamd
20:33:01: cardclients: registering cardclient Radegast
20:33:01: systems: registering CA system SC-Irdeto, pri -10, ident 1001
20:33:01: feature: using feature SMARTCARD
20:33:01: registering Irdeto smartcard (id 497264**)
20:33:01: systems: registering CA system SC-Seca, pri -10, ident 1002
20:33:01: registering Seca smartcard (id 536563**)
20:33:01: systems: registering CA system SC-Viaccess, pri -10, ident 1003
20:33:01: registering Viaccess smartcard (id 566961**)
20:33:01: ACamd v0.5.0.8
20:33:01: loaders: registering loader KEY
20:33:01: Engine DVB Viewer Pro
20:33:01: ** registered systems:
20:33:01: ** SC-Viaccess (pri -10)
20:33:01: ** SC-Seca (pri -10)
20:33:01: ** SC-Irdeto (pri -10)
20:33:01: ** Cardclient (pri -15)
20:33:01: loading cardclient config from C:\Program Files\DVBViewer\Plugins\cardclient.conf
20:33:01: now using protocol version 525 (cdLen=8)
20:33:01: hostname=127.0.0.1 port=15050 emm=1 emmCaids 0604/ffff
20:33:01: Newcamd: username=dummy password=dummy key=010102030205060809101112****
20:33:01: netwatch up
20:33:01: Netwatcher thread started (tid=100491888)
20:33:01: connecting to 127.0.0.1:15050/tcp (127.0.0.1)
20:33:01: Newcamd: CaID=1800 admin=1 srvUA=0000000000000000 provider
20:33:01: client 'Newcamd' ready
20:33:01: now using protocol version 525 (cdLen=8)
20:33:01: hostname=127.0.0.1 port=15050 emm=1 emmCaids 0000/0000
20:33:01: Newcamd: username=dummy password=dummy key=010102030205060809101112****
20:33:01: netwatch up
20:33:01: connecting to 127.0.0.1:15050/tcp (127.0.0.1)
20:33:01: Newcamd: CaID=1800 admin=1 srvUA=0000000000000000 provider
20:33:01: client 'Newcamd' ready
20:33:01: created 2 client(s)
20:33:01: loading smartcard data from C:\Program Files\DVBViewer\Plugins\smartcard.conf
20:33:01: loading smartcard data from C:\Program Files\DVBViewer\Plugins\smartcard.conf
20:33:01: COM1: open serial port
20:33:01: COM1: open failed: No such file or directory
20:33:01: failed to open serial port COM1
20:33:01: COM1: shutting down
20:33:01: COM1: shutdown done
20:33:01: no smartcard interface defined!
20:33:01: Ch: 304 - SKY Inside
20:33:01: Incomming PackageSize [188]
20:33:01: 0x0130 0x0DF3 0x0919 0x00000000 0x0000 0x0DAB 11011010
20:33:01: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:01: cc: cc-loop ProcessEMM 0x0919
20:33:01: [00] Stream enabled for ECM pid 0x0500...
20:33:01: [01] Stream enabled for ECM pid 0x050C...
20:33:01: [02] Stream enabled for ECM pid 0x0504...
20:33:01: [03] Stream enabled for ECM pid 0x0507...
20:33:02: [04] Stream enabled for ECM pid 0x0510...
20:33:02: [05] Stream enabled for ECM pid 0x050E...
20:33:02: [06] Stream enabled for ECM pid 0x0506...
20:33:02: [07] Stream enabled for ECM pid 0x0505...
20:33:02: [08] Stream enabled for ECM pid 0x050A...
20:33:21: Ch: 1108 - SKY Sport 1 (ita)
20:33:21: 0x0454 0x2AA8 0x0919 0x00000000 0x0650 0x012D 11011010
20:33:21: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:21: cc: cc-loop ProcessEMM 0x0919
20:33:21: [00] Newcamd: ECM Proccessed (0.001)
20:33:21: [00] SendDCW Even: 2AA800D200000000:
20:33:21: [00] Newcamd: ECM Proccessed (0.001)
20:33:21: [00] Newcamd: card was not able to decode the channel
20:33:21: [01] Stream enabled for ECM pid 0x0642...
20:33:21: [02] Stream enabled for ECM pid 0x0644...
20:33:21: [03] Stream enabled for ECM pid 0x0641...
20:33:21: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:21: cc: cc-loop ProcessECM 0x0919
20:33:21: [00] Newcamd: ECM Proccessed (0.001)
20:33:21: [00] Newcamd: card was not able to decode the channel
20:33:21: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:21: cc: cc-loop ProcessECM 0x0919
20:33:21: [00] Newcamd: ECM Proccessed (0.000)
20:33:21: [00] Newcamd: card was not able to decode the channel
20:33:21: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:21: cc: cc-loop ProcessECM 0x0919
20:33:21: [00] Newcamd: ECM Proccessed (0.000)
20:33:21: [00] Newcamd: card was not able to decode the channel
20:33:21: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:21: cc: cc-loop ProcessECM 0x0919
20:33:21: [00] Newcamd: ECM Proccessed (0.001)
20:33:21: [00] Newcamd: card was not able to decode the channel
20:33:21: [00] ECM Error count > [4] times
20:33:21: [00] Disable ECM for pid: [0x0650] no decoding posible
20:33:21: [04] Stream enabled for ECM pid 0x066C...
20:33:21: [05] Stream enabled for ECM pid 0x066D...
20:33:22: [06] Stream enabled for ECM pid 0x066B...
20:33:22: [07] Stream enabled for ECM pid 0x065A...
20:33:57: Ch: 1108 - SKY Sport 1 (ita)
20:33:57: 0x0454 0x2AA8 0x0919 0x00000000 0x0650 0x012D 11011010
20:33:57: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:57: cc: cc-loop ProcessEMM 0x0919
20:33:57: ECM: Start --------
81 70 86 00 00 01 14 93 14 94 35 03 98 68 5B 81 21 84 01 00 01 01 02 **
FF 00 0C 6D 7F 0A 75 D6 B8 15 2F 1A 78 09 00 00 7E 0A 23 26 3A 36 FF **
7F E5 C2 0E 90 53 C0 02 60 24 E3 FF 52 51 22 24 68 84 F6 AB 70 A6 3B **
13 F9 7B 2A B1 36 5D EF 3E 15 F9 AF A3 E5 62 8D 7A 28 32 14 72 7B 41 **
62 CC 82 7D CF C5 0F F0 6B 1B 72 9D FA 22 3F AD 2F E8 8D F2 1D CA 1E **
36 DB 79 F1 B3 B6 08 67 E8 5B E3 9D 28 61 74 89 **
20:33:57: ECM: End ----------
20:33:57: [00] Newcamd: ECM Proccessed (0.002)
20:33:57: [00] SendDCW Even: 2AA800D200000000:
20:33:57: [01] Stream enabled for ECM pid 0x0642...
20:33:57: [02] Stream enabled for ECM pid 0x0644...
20:33:57: ECM: Start --------
80 70 86 00 00 01 14 93 14 94 35 03 99 D1 AE 81 21 84 01 00 01 01 02 **
FF 00 C9 6D 7F 0A 38 39 EC F5 BC A4 AF B3 00 00 7E 0A 86 21 77 D9 E6 **
A2 4D 7B FB 90 53 C0 02 0B 12 A1 CF 6E CF BA A8 89 7C 0C 63 B0 49 53 **
DC 10 28 85 7F 20 82 77 BE A4 3B C5 69 8D 3F D2 72 07 58 50 C5 AC 8F **
40 57 06 8A E1 A8 03 78 9C AF FD A0 61 44 48 31 E9 A6 D6 93 CA 40 E7 **
EE 47 C2 CF EA BD 2F 3D 7E 8D CB 9D 8F E7 51 A6 **
20:33:57: ECM: End ----------
20:33:57: [00] Newcamd: ECM Proccessed (0.001)
20:33:57: [00] Newcamd: card was not able to decode the channel
20:33:57: [03] Stream enabled for ECM pid 0x0641...
20:33:57: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:57: cc: cc-loop ProcessECM 0x0919
20:33:57: ECM: Start --------
80 70 86 00 00 01 14 93 14 94 35 03 9A 92 87 81 21 84 01 00 01 01 02 **
FF 00 64 6D 7F 0A C5 38 24 C1 1B 9B 86 BC 00 00 7E 0A C8 0B 62 03 D4 **
45 84 38 D2 90 53 C0 02 B2 17 44 B2 F8 96 7D 45 58 28 F0 B6 F1 96 51 **
30 3C 82 03 1A D3 3B 37 60 83 70 9E 3E 82 A6 A8 43 9E 72 66 92 27 C0 **
18 09 82 55 BF FB E9 2E 7E 79 B8 69 14 9F EC 63 72 2B 4A 36 77 B7 8F **
68 80 4B 13 3A 69 83 DA 5E 28 E0 3F D1 C7 EB 64 **
20:33:57: ECM: End ----------
20:33:57: [00] Newcamd: ECM Proccessed (0.000)
20:33:57: [00] Newcamd: card was not able to decode the channel
20:33:57: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:57: cc: cc-loop ProcessECM 0x0919
20:33:57: ECM: Start --------
81 70 86 00 00 01 14 93 14 94 35 03 9B 29 E3 81 21 84 01 00 01 01 02 **
FF 00 58 6D 7F 0A CC A3 17 6E 5D 0A CA ED 00 00 7E 0A E9 9F B9 50 63 **
D1 75 83 B6 90 53 C0 02 E2 AC 77 33 E3 98 48 72 08 87 71 4A E1 24 65 **
8F 4E 5D 9A 69 0A 51 B7 5F 9E 40 0B 92 41 F8 E6 A5 03 FA 82 25 02 8D **
46 33 B4 5A E3 97 F0 E2 0D 5A 7D DE BA 3C 01 5F 11 D9 03 BB D7 D3 34 **
2D 01 31 18 E9 72 0E 6A BB BE B3 FA 44 77 7A 1B **
20:33:57: ECM: End ----------
20:33:57: [00] Newcamd: ECM Proccessed (0.000)
20:33:57: [00] Newcamd: card was not able to decode the channel
20:33:57: [04] Stream enabled for ECM pid 0x066C...
20:33:57: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:57: cc: cc-loop ProcessECM 0x0919
20:33:57: ECM: Start --------
80 70 86 00 00 01 14 93 14 94 36 03 A1 9F BE 81 21 84 01 00 01 01 02 **
FF 00 B0 6D 7F 0A 03 A3 20 06 BA 06 D3 91 00 00 7E 0A 50 12 9F DB 8E **
3C D7 35 EB 90 53 C0 02 B3 61 00 27 95 DC 79 88 BE 39 31 A2 A6 D0 01 **
C3 09 D7 03 9B 10 77 29 C8 58 CC 3C 50 41 FF 4D 50 D9 69 D3 40 4B 49 **
0F B7 6B 07 25 BA 28 F1 49 1E 8B 1E B6 FA 97 CA BD 0B 95 B3 5E AB AF **
74 34 4B 12 42 FC 22 9D 3C 08 F2 AA 09 C4 40 F1 **
20:33:57: ECM: End ----------
20:33:57: [00] Newcamd: ECM Proccessed (0.000)
20:33:57: [00] Newcamd: card was not able to decode the channel
20:33:57: cc: now trying yy client Newcamd (127.0.0.1:15050)
20:33:57: cc: cc-loop ProcessECM 0x0919
20:33:57: ECM: Start --------
80 70 86 00 00 01 14 93 14 94 35 03 99 D1 AE 81 21 84 01 00 01 01 02 **
FF 00 C9 6D 7F 0A 38 39 EC F5 BC A4 AF B3 00 00 7E 0A 86 21 77 D9 E6 **
A2 4D 7B FB 90 53 C0 02 0B 12 A1 CF 6E CF BA A8 89 7C 0C 63 B0 49 53 **
DC 10 28 85 7F 20 82 77 BE A4 3B C5 69 8D 3F D2 72 07 58 50 C5 AC 8F **
40 57 06 8A E1 A8 03 78 9C AF FD A0 61 44 48 31 E9 A6 D6 93 CA 40 E7 **
EE 47 C2 CF EA BD 2F 3D 7E 8D CB 9D 8F E7 51 A6 **
20:33:57: ECM: End ----------
20:33:57: [00] Newcamd: ECM Proccessed (0.001)
20:33:57: [00] Newcamd: card was not able to decode the channel
20:33:57: [00] ECM Error count > [4] times
20:33:57: [00] Disable ECM for pid: [0x0650] no decoding posible
20:33:57: [05] Stream enabled for ECM pid 0x066D...
20:33:57: [06] Stream enabled for ECM pid 0x066B...
20:33:57: [07] Stream enabled for ECM pid 0x065A...
Non riesco a capire dove può stare il problema?
Grazie per la vostra pazienza. Ed.
La card non processa gli ECM.
Non ti serve il protocollo Chamaleon2, disabilitalo in NewCs.
Ma soprattutto, in Acamd vedo:
20:33:01: hostname=127.0.0.1 port=15050 emm=1 emmCaids 0604/ffff
20:33:01: Newcamd: username=dummy password=dummy key=010102030205060809101112****
20:33:01: netwatch up
20:33:01: Netwatcher thread started (tid=100491888)
20:33:01: connecting to 127.0.0.1:15050/tcp (127.0.0.1)
20:33:01: Newcamd: CaID=1800 admin=1 srvUA=0000000000000000 provider
20:33:01: client 'Newcamd' ready
20:33:01: now using protocol version 525 (cdLen=8)
20:33:01: hostname=127.0.0.1 port=15050 emm=1 emmCaids 0000/0000
20:33:01: Newcamd: username=dummy password=dummy key=010102030205060809101112****
20:33:01: netwatch up
20:33:01: connecting to 127.0.0.1:15050/tcp (127.0.0.1)
20:33:01: Newcamd: CaID=1800 admin=1 srvUA=0000000000000000 provider
20:33:01: client 'Newcamd' ready
CaId= 1800? Oppure Emmcaid 0604/ffff?
Hai settato bene Acamd?
Non ti serve il protocollo Chamaleon2, disabilitalo in NewCs.
Ma soprattutto, in Acamd vedo:
20:33:01: hostname=127.0.0.1 port=15050 emm=1 emmCaids 0604/ffff
20:33:01: Newcamd: username=dummy password=dummy key=010102030205060809101112****
20:33:01: netwatch up
20:33:01: Netwatcher thread started (tid=100491888)
20:33:01: connecting to 127.0.0.1:15050/tcp (127.0.0.1)
20:33:01: Newcamd: CaID=1800 admin=1 srvUA=0000000000000000 provider
20:33:01: client 'Newcamd' ready
20:33:01: now using protocol version 525 (cdLen=8)
20:33:01: hostname=127.0.0.1 port=15050 emm=1 emmCaids 0000/0000
20:33:01: Newcamd: username=dummy password=dummy key=010102030205060809101112****
20:33:01: netwatch up
20:33:01: connecting to 127.0.0.1:15050/tcp (127.0.0.1)
20:33:01: Newcamd: CaID=1800 admin=1 srvUA=0000000000000000 provider
20:33:01: client 'Newcamd' ready
CaId= 1800? Oppure Emmcaid 0604/ffff?
Hai settato bene Acamd?
lista canali
mi sono sempre chiesto se c'è una lista canali "italiana" per dvb viewer, o la possibilità di convertire una delle tante liste canali disponibili in giro.
Voi come fate? Io se parto dalla scanione del dual feed impazzisco.. :O Avete percaso qualcosa che possa fare al caso mio?
mi sono sempre chiesto se c'è una lista canali "italiana" per dvb viewer, o la possibilità di convertire una delle tante liste canali disponibili in giro.
Voi come fate? Io se parto dalla scanione del dual feed impazzisco.. :O Avete percaso qualcosa che possa fare al caso mio?
eduardnort
New member
Prima avevo due righe impostate su
acamd ora ne ho messa una sembra tutto ok passano le chiavi sullo status monitor di acamd ma dvbviewer resta sempre nero, non capisco come mai.
acamd ora ne ho messa una sembra tutto ok passano le chiavi sullo status monitor di acamd ma dvbviewer resta sempre nero, non capisco come mai.
Oltre a rinnovare la richiesta di qualche suggerimento per il discorso lista canali (vedi sopra), sto facendo anche delle prove con vista.
Pur avendo disabilitato il firewall di vista, pur avendo creato l'eccezione x dvbviewer ed aperto la porta sia UDP sia TCP, e pur avendo la rete correttamente funzionante, acamd non riesce a raggiungere il server newcs (che è su un altro pc).
Con XP è tutto ok, la configurazione è la stessa.
Cosa mi sfugge?
Pur avendo disabilitato il firewall di vista, pur avendo creato l'eccezione x dvbviewer ed aperto la porta sia UDP sia TCP, e pur avendo la rete correttamente funzionante, acamd non riesce a raggiungere il server newcs (che è su un altro pc).
Con XP è tutto ok, la configurazione è la stessa.
Cosa mi sfugge?
Grazie. Che tu sappia c'è la possibiltà di convertire liste x altri deco (humax/dreambox) tramite qualche tool in un formato compatibile con dvbviewer?
Stavo pensando di provare tramite Access ed il formato csv o txt di realizzare un db in tal senso, ma prima mi volevo accertare che non ci fosse qualcosa di pronto.
Stavo pensando di provare tramite Access ed il formato csv o txt di realizzare un db in tal senso, ma prima mi volevo accertare che non ci fosse qualcosa di pronto.