Vantage HD Nuovo Firmware Versione 1.3.5
Salve ,
vi annuncio la disponibilità del nuovo firmware per il Vantage HD :
Vantage-HD Firmware Version 1.3.5
The following issues have been addressed & features added in this version:
* For HDMI input, there is now a configuration that allows override of the color space – options being a choice of RGB, YCrCb in 4:4:4, and YCrCb in 4:2:2. Using this instead of the default auto setting means the Vantage-HD will come up straight away with the right color space instead of having to wait on the player to indicate in it’s own time which color space is in use, which can result in temporarily displaying the wrong one. HDMI receivers normally default to RGB until told otherwise in case the source is DVI, which has to be RGB and won’t send out any indication to the contrary;
* 720p and 1080p are now recognized on HDMI inputs at 24 and 48Hz;
* There is now support for the HDMI 1.3 Expansion Board.
This version now also supports Vantage-HD2 hardware, with the following new features:
* When the input is 24Hz or 24sfp frame rate and output display resolution is 720p or 1080p, there is now the facility to output at 24Hz frame rate, as well as using the normal choices of 50 or 59.94Hz.
* Also, when the input is 24Hz or 24sfp frame rate, for any output display resolution, there is now the facility to output 48Hz frame rate, as well as using the normal choices of 50 or 59.94Hz.
Known Issues
There are the following known issues in this release, all of which only apply to the HDMI 1.3 Expansion Board:
* The EDID information supplied to the source is still only to the HDMI 1.1 standard, so the features that are new in HDMI 1.3 will reported as being not available, even though they are actually supported;
* Sometimes, audio is lost when the main input is HDMI and an HDMI PIP is enabled which has no input connected (and switched on);
When at switch-on, if both main input and PIP input are from HDMI sources requiring HDCP authentication, the PIP channel may fail to authenticate properly and so keep trying.
Scaricabile sul sito Calibre :
http://www.calibreuk.com/firmware_update.php
.