brunello
New member
Ciao, qualcuno ha provato questo nuovo convertitore da hdmi a rgb che a detta del costruttore oltre ad aggirare l'hdcp mantiene i 1080p o 720p della sorgente.
Specifiche:
DVI-D 24p Female Port Input (100% digital).
A HDMI -> DVI-D cable can be use to connect to an HDMI source.
RGB 4:4:4 (8 bits) digital input (every HDMI source MUST be RGB 4:4:4 compatible).
Compatible with non-HDCP or HDCP sources.
Compatible with any RGB Display
Directly connect to VGA input.
Easy to install within a minute. (Plug and Play)
10 bits 175MHz triple video DAC - Inter-DAC : 2%
RGB-H/V Male Port D-SUB 15 Output video analog signals (0,7Vpp over 75 ohms impedance)
Ultra short Analog links (<1 cm) on the HD fury RGB 1080p for optimal quality.
DVI video bandwidth in VGA/RVB outputs: 25-165MHz
DVI Data Rate - Bandwidth 1.65 Gbps (Single link)
Maximum resolutions: UWXGA (1920x1200) at 60Hz or SXGA (1280x1024) at 85Hz
Computer compatible (PC, Mac) HDTV ready (480p/576p/720p/1080i/1080p48/50/60 compatible)
DVI1.0 compliant / HDMI interoperable and HDCP ready
HD-DVD and Blue Ray Disc players compatible
HDCP compatible with embedded keys loaded.
Energy management : DVI et VESA DPMS compatible.
Ultra low power consumption in Standby (3,5mA)
Maximum power : 0.4A under 5V (at 165MHz pixel clock)
On-board DC/DC converter (15V to 5V) with extra-low EMI signature
Power +5V from DVI/HDMI
Blue LED to display active digital link.
Low cost solution – Single IC solution
Small size : 75x56mm black cabinet
Installation: the RGB 1080p module is DIRECTLY screwed to the back of the display (where VGA/YUV SUB-D plugs stand).
Shortest RGB analog video link as possible
HDCP rules compliant: no end-user access to decrypted analog video. Once screwed, this module becomes "a part of the display itself".
Professional factory made (mass-production) using pick / place and reflow / wave solder pro. equipment.
Gold Platted connectors, tracks and material
Specifiche:
DVI-D 24p Female Port Input (100% digital).
A HDMI -> DVI-D cable can be use to connect to an HDMI source.
RGB 4:4:4 (8 bits) digital input (every HDMI source MUST be RGB 4:4:4 compatible).
Compatible with non-HDCP or HDCP sources.
Compatible with any RGB Display
Directly connect to VGA input.
Easy to install within a minute. (Plug and Play)
10 bits 175MHz triple video DAC - Inter-DAC : 2%
RGB-H/V Male Port D-SUB 15 Output video analog signals (0,7Vpp over 75 ohms impedance)
Ultra short Analog links (<1 cm) on the HD fury RGB 1080p for optimal quality.
DVI video bandwidth in VGA/RVB outputs: 25-165MHz
DVI Data Rate - Bandwidth 1.65 Gbps (Single link)
Maximum resolutions: UWXGA (1920x1200) at 60Hz or SXGA (1280x1024) at 85Hz
Computer compatible (PC, Mac) HDTV ready (480p/576p/720p/1080i/1080p48/50/60 compatible)
DVI1.0 compliant / HDMI interoperable and HDCP ready
HD-DVD and Blue Ray Disc players compatible
HDCP compatible with embedded keys loaded.
Energy management : DVI et VESA DPMS compatible.
Ultra low power consumption in Standby (3,5mA)
Maximum power : 0.4A under 5V (at 165MHz pixel clock)
On-board DC/DC converter (15V to 5V) with extra-low EMI signature
Power +5V from DVI/HDMI
Blue LED to display active digital link.
Low cost solution – Single IC solution
Small size : 75x56mm black cabinet
Installation: the RGB 1080p module is DIRECTLY screwed to the back of the display (where VGA/YUV SUB-D plugs stand).
Shortest RGB analog video link as possible
HDCP rules compliant: no end-user access to decrypted analog video. Once screwed, this module becomes "a part of the display itself".
Professional factory made (mass-production) using pick / place and reflow / wave solder pro. equipment.
Gold Platted connectors, tracks and material