akiravf
New member
Video Features
- Supports HDMI 1.4a with 3D
- 7 x HDMI in / 2 x HDMI out with GUI (Graphical User Interface)
- One-cable HD solution
- All sources are up-scaled to 1080P by Anchor bay Hi-bit ABT2015 scalar
- Audio Return Channel
- Deep Color
“x.v.Color”
- Auto Lipsync
- HDMI control function
- Audio Features
- Dynamic Discrete Surround Circuit, D.D.S.C.-HD
- HDMI Clock Control via DENON LINK 4th
- Fully discrete, identical quality and power for all 9channels
- 9ch Discrete Mono Amp Construction
- 4 ohm Speaker Drivability
- High definition audio support
- Dolby TrueHD
dts-HD Master Audio
Supports Dolby Pro Logic IIz processing
Minimum Signal Path for clear audio and video signal
- Direct Mechanical Ground Construction
- Audyssey MultEQ XT 32 and Auto Setup
- Audyssey multiple subwoofer calibration
- Dual subwoofers preout
- Audyssey DSX Processing (11.2 ch)
- Direct play for iPod and iPhone via USB
- USB, Direct Digital connection for superior digital to analogue conversion
- Dolby Volume
- Stable power supply for high-quality sound playback
- Enhanced network capability
- AirPlay now included
- Android SmartPhone audio streaming (DLNA)
- Internet Radio
- Network audio/photo streaming via Ethernet
- Pandora, flickr, Napster and Rhapsody online support (where applicable)
[
Party Mode Plus
FLAC HD, High-resolution audio format
- Compatible with Windows® 7
- Web interface for web control & setup
- Convenience features
- iPhone app
- Newly developed pre memory remote control handset with LCD
- Remote Setup Guidance
- Simultaneous playback on two HDMI channels
- 2-line fluorescent display on front panel
- Sleep timer function
- Audio Delay function(max. 6 frames or 200 msec)
- Custom Installation features
- 3 source / 3 zone capability
- iPod and iPhone playback for Zone 2 / Zone 3
- PCM playback in Zone 2 / Zone 3
- Power Amp Assign function
- Muting level settings (Full/-40dB/-20dB)
- Audio level memory, capable of correcting different signal levels for each input device
- Variable subwoofer crossover switching
- RS232, AMX, Crestron third party control support
- PC and iPhone setup via Ethernet (web control)
- Remote Access & Maintenance
- IP Control
- Audyssey installer Program Ready
- Lower power consumption at stand-by 0.1 W(Standby)
- Main Specifications
- Power amplifier section
- Rated output *THD figures are power amp stage values.
- Front L/R
140 W + 140 W (8 ohms, 20 Hz - 20 kHz, THD 0.05 %)
170 W + 170 W (6 ohms, 1 kHz, THD 0.7%)
- Center
140 W(8 ohms, 20 Hz - 20 kHz, THD 0.05 %)
170 W(6 ohms, 1 kHz, THD 0.7%)
- Surround L/R
140 W + 140 W(8 ohms, 20 Hz - 20 kHz, THD 0.05 %)
170 W + 170 W(6 ohms, 1 kHz, THD 0.7%)
- Surround Back L/R
140 W + 140 W(8 ohms, 20 Hz - 20 kHz, THD 0.05 %)
170 W + 170 W(6 ohms, 1 kHz, THD 0.7%)
- Front Height/Front Wide
140 W + 140 W(8 ohms, 20 Hz - 20 kHz, THD 0.05 %)
170 W + 170 W(6 ohms, 1 kHz, THD 0.7%)
- Preamplifier section
- Input sensitivity/impedance 200 mV / 47 kÙ/kohms
- Frequency response 10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
- S/N Ratio 102 dB (IHF-A weighted, DIRECT mode)
- General
- Power supply AC 230 V, 50 Hz
- Power consumption 780 W (Standby 0.1 W)
- Dimensions (W x H x D) 434 x 171 x 414 mm
Weight 17.3 kg
Ultima modifica:
