Visualizzazione Stampabile
-
Nuovo FW 2.03_A3
Nuova beta (o alfa?) 2.03_A3 per tutta la famiglia 6600.
ftp://ftp.dvico.com/Products/TViX/Fi...0_2.0.3_A3.zip
Release Note della versione 2.0.3A3 rispetto all'ultima ufficiale 1.9.9
[Changes]
[Multimedia Player/ System]
1. Supports the configurable user-interface.
· User can change main user interface (background image, icons) and screen saver.
· Store the “tvix_bg.jpg” (for background image), “tvix_movie.png” (for movie icon), “tvix_music.png”(for music icon), “tvix_photo.png”(for photo icon), “tvix_hdtv.png” (for hdtv icon), “tvix_reclist.png” (for record list icon), “tvix_ims.png” (for internet service), “tvix_setup.png” (for setup) on the root folder of internal HDD.
· The tvix_bg.jpg should be 1280x720 JPEG format. The recommended size of each icon is 362x404 (either PNG or JPG format.) If you want to use alpha blending on icon file, the ARGB should be ARGB(0, 8, 8, 16) format.
· Store the “tvix_ss.jpg” for screen saver image. The size is 160x160.
· You can also change the text image just below each icon. Please refer to the usage link below for detail.
· http://www.tvix.co.kr/ENG/faq/defaul...rial=38&id=414
2. Supports the HD-audio pass-thru. (for 6600+, 6620DUO, 6640DUO )
· Supports the Dolby True-HD pass-thru.
3. Supports the Web-Remote 2nd version.
· Supports the automatic detection of iPhone, iPad, Android phone and notebook PC, and adjust the resolution accordingly.
· Supports the “Control” button which enables popping-up of same buttons as actual remote. So you can do anything with Web-Remote just like actual remote.
· Supports HDTV/ PHOTO main user interface.
· For changes and new usage please refer to ftp://ftp.dvico.com/Manual/TViX/etc/Web_Remote_Eng.pdf
4. Supports the APE/ CUE music file format.
. Supports the lossless APE music format.
· Supports the CUE playlist file as well.
5. Supports the “Native Frame Rate”.
· Supports original frame rate of each file. (60i, 50i, 24p, 25p, 50i, 50p, 60p)
· You can configure the behavior of each frame-rate.
· This mode is only available when screen resolution is 1080p50Hz or 1080p60Hz.
· The “native resolution” (e.g. 480p24Hz 480p24Hz) is not supported at this moment
· To enable this Setup > AV > Video Auto Switch > Native framerate
6. Supports the enforcement of audio pass-thru.
· This option can be turned on at Setup > AV > Audio & Video > Force audio pass-thru
· If you turn on this option then you set “RAW” digital audio pass-thru mode, the actual raw digital audio format will be output regardless of EDID information of TV.
· This will enable raw digital bit-stream output when you connect TVIX like TVIX > HDMI port > TV > optical/coaxial cable > AV receiver.
· Some TV cannot pass-thru Dolby Digital or DTS properly. Please check your TV first.
7. Supports the OSD on/off.
· You can turn off the OSD for using TVIX as commercial playback machine.
8. Supports the slow fast forward.
· After “pause”, press right button to enable 1/16x > 1/8x > 1/4x > 1/2 > 3/4x slow forward in turn.
9. Supports the subtitle text encoding regardless of menu language.
· You can select text encoding after popping-up subtitle window then “left” button (can see small triangular button on left side)
· You can also configure it at Setup > System > Language > Text encoding
10. Supports the subtitle “OFF” status.
· If you turn off the subtitle, then the status will be saved and be applied next time you boot-up.
11. Changes the default main user interface to brighter color combination.
12. Supports the 16:10 aspect ratio
13. Supports the Polish and Portuguese menu language.
14. Fix the problem of some idx+sub subtitle.
15. Changes the Hebrew font for better looking of system menu.
[HDTV/ PVR]
1. Improves the EPG user interface.
2. Configurable channel up/down key behavior.
· You can select “favorite channel up/down” on setup menu
3. The “Info” window will disappear automatically.
4. Fixes the in-accurate CUT-IN/ CUT-OUT point when editing the recorded stream.
· Also fixes the padding problem (2 files created)
5. Fixes the recording problem when special character is inserted at channel name.
6. Fixes the Hebrew EPG problem.
[Network]
1. Improves IMS (Internet Media Service) functions quite a bit
· Rearranges overall icons and services.
· Improves “WEATHER” gadget. (Supports multi-national language and adds “favorite” location. So you can save your location for checking weather.)
· Pressing RIGHT button on You-Tube list will show the thumb-nail preview.
· Supports PLAY/PAUSE of You-Tube.
· Adds “Internet TV” service.
· You can download movie files on some service.
For example, go to IMS > Internet channel > HD net , then press “RIGHT” button on wanted movie clip. Select “download” button, then the clip will be stored on /Movie folder
2. Improves the network setup procedure
· Setup wizard will appear to ease the network setup
· Support the manual designation of hidden SSID. Click the “unknown” SSID at AP browser windows and input the name.
· Support both “OPEN” and “SHARED” network keys.
· Will memorize previous NETWORK KEY up to 4 APs (access points). You don’t have to re-input the NETWORK KEY during the setup procedure, if you done it once before.
3. Supports Ralink RT307x chipset Wi-Fi module
· Supports both WEP/ WPA configuration.
· Shows very good sustained performance (1080p streaming is O.K.)
· It will take about 30 seconds for initial setup of Ralink module.
· Most of the current 11n Wi-Fi dongles are RT307x based. Please let us know the USB VID/PID for adding your own RT307x based 11n Wi-Fi dongle
-
Quindi è confermato che il DTS HD MA per ora non è supportato: bella dimostrazione di serietà. Inoltre, almeno un downsampling delle codifiche audio HD in PCM potevano farlo. :mad:
Ho appena ordinato il Popcorn Hour C-200... bye bye, DVico, non mi freghi più :mad:
-
Installata la nuova versione e, toccando ferro...., i file .m2ts lossless me li legge bene e l'audio lo riproduce correttamente. Con la versione 2.0.2 B8 si impallava tutto. Per sentire questi file dovevo mettere la patch.
Ciao
Lara
-
Citazione:
Originariamente scritto da Marlenio
Ho appena ordinato il Popcorn Hour C-200... bye bye, DVico, non mi freghi più :mad:
Io Marlenio se mi posso permettere se fossi stato in te sarei passato al Dune HD 3.0, almeno li avevi il pieno supporto ai BluRay cosa che il C200 al momento non ha, per il resto sono a grandi linee uguali...
Poi tornando al 6600,a parte che oltre a non supportare il DTS HD non fa altro che dare in uscita il PCM e non lo stream da dare in pasto poi ad un ampli che poi giustamente si occupa lui della codifica, perchè poi come sappiamo questi lettori che sul versante audio fanno di suo già schifo ,figuriamoci che cosa può venire fuori da un PCM convertito da una board economica come monta il 6600.
A me questa storia dei 6600+ mi sa di tamponamento in corsa causato già in fase di progettazione di errori irreversibili, e dunque solo in una nuovo player risolveranno questo annoso problema dell codifiche HD che in questo momento mi sa più da "toppa" che da lavoro ben fatto.
-
Ho preferito il C200 per il discorso della gestione musicale: se riuscissi ad integrare tutto su una sola macchina preferirei. ;)
-
a me sembra legnosissimo il menù del c200... poi boh, ognuno fa le sue scelte ;)
Tornando al discorso dvico, questo ultimo firmware...
1) il menù principale mi sembra perda di "fluidità" (lo scrolling principale delle icone), penso sia dovuto al fatto della customizzabilità che hanno introdotto (sfondo ed icone personalizzabili).
2) trovare nel setup, la voce "force audio passtrought mi fa solo imbestialire non avendo il plus... :cry: (infami dvico, infami!!!)
3) usandolo ho notato qualche buggetto nella gestione dei sottotitoli, che per farli ripartire ho dovuto uscire dal filmato e riavviarlo (si, pure qualche piccolo bug, ed ancora non hanno neanche implementato un settaggio come dio vuole...)
Ancora ho da testare il lato puramente "tecnico" di flussi video/audio... Ma volevo aspettare una release un pò più "ufficiale"...
Diciamo, secondo me resta un ottimo prodotto, veloce ed abbastanza compatibile con tutti i formati. Con una grossa mancanza almeno per quanto mi riguarda, il passtrought DTS-HD e DTS-MA mancante.
Per il resto, i programmatori di questi firmware mi sembrano un pò delle capre... :rolleyes:
-
Io m4ss non me ne farei proprio una preoccupazione, anche se la versione plus fa il passtrought del Dolby true HD (ma manca all'inverosimile il DTS HD master) lo fa internamente dando in uscita un PCM.
Non mi stancherò mai di ripeterlo, con una board del genere le differenze saranno impercettibili e anzi sono sicuro che il PCM sarà tutto fuorchè cristallino.
Non vale la pena prendersela, la differenza il 6600 l'avrebbe fatta con entrambe le codifiche e con il flusso gestito in streming ad un amlpi esterno, e allora si che avrebbe fatto la differenza.
-
Ciao a tutti,
dai Firmware 2.x ho notato questa stranezza:
se l'audio HDMI o SPDIF è settato su "all digital" non si sente più audio con i formati mpeg (ad esempio le tracce audio delle registrazioni che sono mpeg1 layer2 oppure i classici file audio mp3).
Ho scoperto che per risolvere occorre che DTS sia settato su analog.
Quindi occorre settare su "all analog" oppure usare l'opzione custom del SPDIF con DD su digital e DTS su analog.
Avete notato anche voi questo baco?
-
Evito di quotarmi.
Purtroppo il mio precedente messaggio non è valido. Ieri ho provato a rivedere i filmati e si impalla di nuovo tutto. Strano però, appena installato il nuovo firmware andava tutto liscio. Davvero strano.
Lara
-
a chi interessa acquistarlo...
-
@ Bilucalo
Quale parte dell'articolo 2t del Regolamento o dell'avviso posto all'inizio di ogni Discussione Ufficiale in cui si dice che in questo tipo di discussioni sono vietati i "consigli per gli acquisti" non ti è sufficientemente chiara ?
Per il futuro sei pregato di attenerti scrupolosamente al Regolamento.
Grazie.
Ciao
-
-
versione ufficiale 2.0.3
http://www.tvix.co.kr/ENG/download/d...PVR&pSerial=52
Qualcuno ha notato differenze con la 2.0.3A3 ?
-
Citazione:
Originariamente scritto da ilpata
Qualcuno ha notato differenze con la 2.0.3A3 ?
Sì, hanno corretto il baco del suono MPEG :)
Con la 2.0.3_A3 e audio settato su "all digital" (HDMI o SPDIF) non si sentiva più audio con i formati mpeg.
Ora è a posto.
Altro per ora non ho notato.
Con questo FW, posso dire (finalmente!) che si riesce ad avere suono contemporaneamente da HDMI o SPDIF senza anomalie.
Molto utile per chi come me collega così:
HDMI -> TV
SPDIF-> ampli AV
A questo punto la ciliegina sulla torta sarebbe la patch blucore che c'era sui FW 1.9x, ovvero in caso di DD True, DTS HD, LPCM, AAC 5.1 o WMA 5.1 esce un PCM multicanale.
Ora in caso di DD True, DTS HD esce il core (e mi va ancora bene..)
Ma in caso di LPCM, AAC 5.1 o WMA 5.1 esce un PCM stereo
-
Quindi And72 tu hai installato la 2.0.3?
Grazie
Lara