Ma se io quando mi arriva non monto l'hard disk interno cosa si perde in funzionabilità praticamente cosa non si può fare grazie
Visualizzazione Stampabile
Ma se io quando mi arriva non monto l'hard disk interno cosa si perde in funzionabilità praticamente cosa non si può fare grazie
1) SICitazione:
Originariamente scritto da apilone
2) Entrambi
3) Circa 5,4 Mb/sec su hd interno, 5,2 su quello usb (con win7), 3,8 usando un altro pc poco performante che uso per scaricare da internet (xp). test fatto con 2 file avi per un totale di 1.08 gb, tempo impiegato 200 sec.
4) Non ho niente per provare, ma a mio avviso non usare questo apparecchio per vedere i DVD, molto meglio un normale lettore dedicato.
In funzionalità direi niente, se non erro nessuna funzionalità per il momento è legata all'uso esclusivo dell' Hdd interno.:nono:Citazione:
Originariamente scritto da baffobaffone
L'unica cosa da tenere presente è che naturalmente dovrai prevedere comunque una fonte di immagazzinamento dati che può essere esterna (es. Hdd esterno) oppure usare direttamente il pc (in Streaming) per mezzo del WIFI o della LAN.:cool:
Emergency Firmware basato sulla V.2.0.1
Spero possa risultare utile: :cool:
http://gator884.hostgator.com/~xtrea...ergency201.zip
Istruzioni:
Before starting the procedure of emergency recovery - Please make sure you are using the AV RCA cables and not HDMI.
Some TV HDCP protocols may cause problem to show the procedure on TV.
(1) Download the file Xtreamer Emergency
(2) Extract the file install.img (120 mb)
(3) Copy the “install.img” file to the root of the USB flash memory or HDD inside Xtreamer.
(4) Take out the unit out of the electricty power on the wall. wait 10 sec. Bring it back to the power
(5) In Remote control, press “Home” -> “3” -> “Power” not any other sequence.
No need to use power first. Any other sequence will fail and nothing will happen as the call for this procedure is initiated by HOME button pressed first...Keep it pressed + press 3 + press power until you see the process starts.
If the firmware is not in the root of the USB the process will fail as the process seek the .img in the USB root.
Process Emergency upgrade should be visible on the screen if done correct.
Please note : After “intro” screen, if system boots without further update procedure, re-try emergency firmware update while powering-off the unit. It means you did not do it in the correct way. PRESS the HOME first and after 3 and after POWER while the unit is OFF.
fonte:
http://www.xtreamer.net/downloads/xt...er--2-0-1.aspx
raga scusate quando si immette la password della rete wireless (wpa) nell'xtreamer, ci sono nell'elenco dall'xtreamer i caratteri speciali tipo: $%&~*@# ??ci sono tutti??
curioso....
riporto quanto scritto sul forum ufficiale.
in sintesi se colleghi l'antenna USB con un cavo aggiuntivo al Xtreamer, il cavo fa da antenna amplificando il segnale :D
xphoto.ch wrote:
Same for me
I don't have problems with antenna into usb port, but when I plug it to an extension USB cable, my transfer speed goes 3x.
ok I'm far from the router etc.. so don't expect to have max speed, BUT.
with antenna in USB host: ~120-140KB/s
with antenna in USB cable extension: ~350-500KB/s
go figure why.. maybe the antenna uses the cable as additionnal antenna ? http://forum.xtreamer.net/images/smi...e_confused.gif
forgot to say, I use WEP 64 bits and hidden SSID. I had to show SSID first to let it connect, but then I could hide it again.
I'll just quote myself http://forum.xtreamer.net/images/smi...on_mrgreen.gif
ok today I've bought a USB extension of 1.5m length, and I have speed up to 1Mb/s from the same place via FTP
so YES the USB cable makes antenna ! http://forum.xtreamer.net/images/smi..._e_biggrin.gif
yesterday the extension cable was only 10cm long.
I moved the antenna around now and can even reach up to 1.8Mb/s.
"Transferred 1 file totaling 698.83 MB in 7 minutes 31 seconds (1.55 MB/s)"
naaaa ... il cavo semplicemente gli permette di posizionare meglio l'antenna.
Quella del cavo che fa da antenna è una cosa che funziona in FM con gli auricolari ...
l'ho pensato anche io sinceramente.Citazione:
Originariamente scritto da Loncs
raga scusate ma oltre alla lan al router va collegato anche via usb al pc, non so per usarlo quando il pc è acceso e in download??
Poi volevo sapere se dentro ci si possono caricare i comuni file che uso con utorrent??grazie
scusate stavo parlando del nas etrayz.....i .torrent per i download sono compatibili??Citazione:
Originariamente scritto da clodrusso
Per l'xtreamer se invece vi è montato l'hd interno posso usarlo via router(lan o wifi) come HD di massa da qualsiasi computer della rete??cioè una volta collegato via cavo o wifi al router, vedo l'hard disk dell'xtreamer dal pc?
grazie
C'è comunque un modo per velocizzare il wi-fi usando la fakeshell per aprire il file:
Edit /usr/local/daemon/samba/lib/smb.conf
e cambiare da:
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_SNDBUF=8192 SO_RCVBUF=8192
a:
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_SNDBUF=32768 SO_RCVBUF=32768
non ho ancora provato però.
Sto provando a connettere l'xtreamer con la rete wifi ma quando mi chiede la password posso solo inserire numeri :eek: , nella mia password invece ci sono sia numeri che lettere (ad esempio 3j56dkv00s ecc..) come sposso fare? :confused:
Dubito di questa tua affermazione in quanto io ho Fastweb ed ho una chiave WPA2 di lettere e numeri e non ho trovato nessun problema nel poter inserire la mia password, utilizzando quella tastiera che appare sullo schermo TV....:fiufiu:Citazione:
...quando mi chiede la password posso solo inserire numeri , nella mia password invece ci sono sia numeri che lettere...
Naturalmente salvo cambiamenti nel firmware 2.0.2 in quanto io sono ancora fermo sulla versione 1.0.3.1
ciao :cincin:
...paperino...è impossibile. :D
Questa è la procedura giusta:
Network--> Wireless setup--> Connection 1-->Get SSID Name (qui scegli la tua rete wifi e schiacci il tasto "Enter" del telecomando)-->Si apre il riquadro WPA Key e qui trovi la tastiera a video con lettere e numeri...inserisci la password della tua rete wifi e poi pigi il tasto OK che vedi a video (ovviamente schiacciando il tasto "Enter" del telecomando.
Dopodichè Xtreamer farà il test di connessione e si assegnerà un indirizzo IP tramite DHCP.
...finito.:D
Dubiti in che senso? :mad: :boxe:Citazione:
Originariamente scritto da Truciolo