Sistema 5.1 piccole dimensioni: Wharfedale DX-1 HCP vs HK-TS16 (Harman Kardon)
Salve a tutti....
dopo alcune ricerche alla fine ho deciso di orientarmi su un kit simile a questi per tanti motivi (primo fra tutti estetica e sopratutto dimensioni).
Fra i 2 kit cosa mi consigliereste?
L'unica differenza è che l'HK montano in ogni cassa un doppio woofer:
Codice:
Speaker System
■ Frequency response: 45Hz – 20kHz (–6dB)
SAT-TS11 Satellites
■ Midrange transducers: dual 75mm (3") cones, video-shielded
■ High-frequency transducer: 13mm (1/2") dome, video-shielded
■ Impedance: 8 ohms nominal
■ Recommended power: 10 – 120 watts
■ Sensitivity: 86dB @ 2.83V/1 meter
■ Enclosure type: sealed
■ Dimensions (H x W x D): 243mm x 100mm x 92mm
(9-9/16" x 3-15/16" x 3-5/8")
■ Weight: 1kg (2.2 lb)
CEN-TS11 Center Speaker
■ Midrange transducers: dual 75mm (3") cones, video-shielded
■ High-frequency transducer: 19mm (3/4") dome,
video-shielded
■ Recommended power: 10 – 120 watts ■ Impedance: 8 ohms
■ Sensitivity: 86dB (2.83V/1m)
■ Enclosure type: sealed
■ Dimensions (H x W x D): 102mm x 241mm x 92mm
(4" x 9-1/2" x 3-5/8")
■ Weight: 1kg (2.2 lb)
HKTS210SUB Subwoofer
■ Low-frequency transducer: 200mm (8") cone
■ Amplifier power: 200 watts RMS ■ Enclosure type: sealed
■ External trigger voltage: 3V – 30V AC/DC
■ Dimensions (H x W x D): 353mm x 267mm x 267mm
(13-29/32" x 10-1/2" x 10-1/2")
■ Weight: 9kg (19.8 lb)
Codice:
DX-1 CENTRE
Description/Format Two-way Aperiodic system
High-Frequency Drive Unit 1 x 19mm silk dome
Mid/Bass Drive Unit 2 x 75mm woven PP cones
Frequency Response 80Hz – 20kHz ±3dB
Sensitivity (1W@1M) 86dB
Crossover Frequency 3.6kHz
Recommended Amp (RMS) 30 – 100W
Dimensions (HxWxD) 122x292x123mm
Net weight 2.5kg
Accessories Rubber feet
DX-1 SATELLITE
Description/Format Two-way closed-box system
High-Frequency Drive Unit 1 x 19mm silk dome
Mid/Bass Drive Unit 1 x 75mm woven PP cone
Frequency Response 120Hz – 20kHz ±3dB
Sensitivity (1W@1M) 84dB
Crossover Frequency 3.6kHz
Recommended Amp (RMS) 20 – 80W
Dimensions (HxWxD) 190x122x123mm
Net weight 1.8kg
Accessories Rubber feet
DX-1 SUBWOOFER
Description/Format Active subwoofer with reflex loading
Drive Unit 1 x 200mm long-throw cone
Frequency Response 20-200Hz (+/-3dB)
Rated Power Output 70W RMS
Peak Power Output 150W
Crossover Range 30 – 150Hz (adjustable)
Line Input Sensitivity 200mv
Inputs Stereo line in (2 x RCA-phono)
LFE line in (RCA-phono)
Stereo speaker level in
Input Impedance Line In: 20kΩ
Signal-to-noise ratio (S/N) 86dB
Avg. Max Output @1m 110dB
Options Auto power; phase inversion
Dimensions (HxWxD) 335x285x320mm
Net weight 8.6kg
Accessories IEC power cord, rubber feet
Dalla scheda tecnica sembrerebbe superiore il kit HK....ma alla fine non saprei quanto fidarmi delle schede :)
