Scelta diffusori - focal chorus 726v vs sbt
Ciao a tutti,
sono un neoiscritto e mi rivolgo a voi per chiedervi un consiglio circa la scelta dei seguenti diffusori che ho selezionato con fatica:
- focal chorus 826v
http://www.son-video.com/images/dyna...ural_P_600.jpg
Specifiche
Type 3-way bass-reflex floorstanding loudspeaker
Drivers 2x61/2" (165mm) Polyglass woofers
61/2" (165mm) Polyglass midrange
1" (25mm) TNV Al/Mg inverted dome tweeter
Frequency response (+/- 3dB) 45Hz - 28kHz
Low frequency point (- 6dB) 37Hz
Sensitivity (2.83V/1m) 91.5dB
Nom. impedance 8 ohms
Minimum impedance (@25°C) 2.9 ohms @ 118Hz
Max. power handling. 220W
Power RMS 150W
Crossover frequency 300Hz / 3kHz
Dimensions (HxWxD) 407/8"x111/8"x143/4"
(1038x282x375mm)
Net weight 56.8lbs (25.8kg)
O PSB image T6
http://www.yeswehaveawebsite.com/Hom..._Speaker_L.jpg
Specifiche
Frequency Range
On Axis @ 0° ±1.5dB 45-20,000Hz
On Axis @ 0° ±3dB 32-23,000Hz
Off Axis @ 30° ±3dB 45-10,000Hz
Lf Cutoff -10dB 28Hz
Sensitivity
1w (2.83V) @ 1m, IEC-filtered Pink Noise, C-weighted
Anechoic Chamber 89dB
Typical Listening Room 91dB
Impedence
Nominal 6 Ohms
Minimum 4 Ohms
Input Power
RMS, Clipping < 10% of the Time
Recommended 20 - 200 Watts
Program 200 Watts
Acoustic Design
Tweeter (Nominal) 1” (25mm)
Titanium Dome with
Ferrofluid Neodymium Magnet
Midrange (Nominal) 5 1/4” (133mm)
Clay/Ceramic filled Polypropylene Cone,
Rubber Surround
Woofer (Nominal) 2 x 6 1/2” (165mm)
Clay/Ceramic filled Polypropylene Cone,
Rubber Surround
Crossover 2,200Hz, LR4, 500Hz, B3
Internal Volume Design Type 1.93 cu ft (54.7L)
Sealed Mid-Range Chamber Dual Port Bass Reflex
Size (W x H x D)
Millimeters 231 x 1031 x 380mm
Inches 9 1/8 x 40 5/8 x 15”
Net Weight
Kilograms 22.1kg/each
Pounds 48.5lbs /each
Shipping Weight
Kilograms 26.2kg/each
Pounds 57.8lbs /each
Mi sembrano entrambi una buona scelta e sono quasi allo stallo.
Infine posso pilotare decentemente con un buon sintoampli denon o simile?
