Novità x lo scraper in italiano?
Visualizzazione Stampabile
Novità x lo scraper in italiano?
vorrei capire bene coma funziona l'equalizzazione parametrico. il fattore Q, che credo serva a impostare la banda di equalizzazione centrata sulla frequenza impostata, come varia al variare delle varie frequenze? ad esempio impostare 33 Hz con Q=10 e Gain=-5 significa diminuire di 5 dbi tutte le frequenze comprese tra 28 e 38 Hz giusto? ma a 10000 Hz come ci si comporta? es. se imposto 9000 Hz Q=1000 Gain=+5 otterrò un incremento di 5 dbi da 8000 a 10000 Hz?
è corretto oppure devo ragionare in modo differente?
mi rispondo da solo.
Q varia in base all'ottava presa in considerazione per cui quello che ho scritto sopra è un'emerita......
.....o almeno questo è quello che ho capito leggendo qui
ragazzi scusatemi, tramite Jriver e' per caso possibile in qualche modo ricevere il DTT con Mediaset premium e poi processare il segnale inserendo nella catena ffdshow, avisynth ecc come per i film?
GRAZIE
Ciao, Con una scheda tv con supporto dvb-t puoi vedere con JRiver il canali in chiaro Mediaset applicando tutti i migliori filtri direct show (lav, ffdshow. madvr ecc.), ma per quelli criptati non saprei dirti, idem per i canali satellitari.
ciao a tutti,
finalmente, grazie ad un po' più di tempo a disposizione, mi sono deciso a provare questo benedetto jriver... ma ho un problemino (e te pareva... :( )
mi dice che non ha i LAV...
il PC, riallacciandomi al discorso di stealth82, non è in rete e purtroppo sarebbe molto problematico collegarlo per tutta una serie di motivi...
se io scarico i lav 5.0 e poi li installo manualmente va bene lo stesso oppure sono OBBLIGATO ad effettuare una connessione internet ?
in programmi, nella cartella lav, dovrebbe poi apparire (mi rocordo quando provavo ad installare molti codec con MPC HC...) lav audio confiduration, splitter conf. e video conf.
devo settare qualcosa di particolare o fa tutto jriver.
grazie
ciao
Mario
http://yabb.jriver.com/interact/index.php?topic=71119.0Citazione:
17.0.115 (3/27/2012)
1. Fixed: Date formatting tokens %W and %U were counting from the first week in the month instead of the first week in the year.
2. Fixed: When tagging ID3v2 tags (MP3, WAV, DSF) with images other than just a front cover, the results could be unpredictable (Media Center will replace front and other images with the image in Media Center, and leave other types).
3. Fixed: Japanese locale (and maybe others) could have problems loading Podcasts.
4. NEW: Audio Path reports the source format (especially useful for seeing if DTS-MA, etc. is being decoded fully).
5. Changed: When toggling zones, Playing Now views are only switched to the new zone if they're in the current tab, split view, and not locked (so having multiple splits each showing a different Playing Now works nicely).
6. Fixed: With a Search List view category, the sorting could be disabled but stuck on 'Descending' causing the list to sort in reverse.
7. Changed: Resuming from standby, a Library Server client will sync with the server (must have 'Options > Media Network > Client Options > Auto sync with server' enabled).
8. Changed: A file will not be eligible to transfer to a handheld or burn to a CD/DVD until any queued tagging for that file has finished.
9. Fixed: Audio Path text was not readable with some skins.
10. Fixed: Right-clicking a non-selected pane item and picking an action could perform the action on the previous selection.
11. Changed: Updated LAV filters to .50. Decoding speed increases, RealAudio Lossless support, lots of other improvements.
12. Fixed: Unusual behavior when corrupt podcast files were downloaded.
13. Changed: Improved visual smoothness when switching into Cover View (also removed black flicker when pressing stop from Cover View).
14. Changed: The Smartlist Editor doesn't show a drop list for 'Large Value' type fields like Description, etc.
15. Changed: If video playback is paused when entering Theater View, it is not automatically resumed if Theater View is exited to Standard View.
17.0.114 (3/26/2012)
1. Changed: When using list fields in Rename, Move, & Copy Files expressions, the full list can be retrieved by using 0 as the second field parameter (example: [Keywords, 0]).
2. Fixed: The server core was not supporting HTTP/1.1 pipelining correctly, causing scrambled artwork in WebGizmo on iOS 5, and possibly other problems.
3. Fixed: WebGizmo better handles escapement of invalid characters.
4. Changed: Tweaks to ensure WebGizmo pages pass W3C validation.
5. Fixed: Date formatting was not outputting a literal percentage properly when using %%.
6. Changed: Date formatting supports %W and %U.
17.0.113 (3/23/2012)
1. NEW: Added support for dual-layer DVD burning.
2. Fixed: Scrolling in Theater View 3d lists could crash in some cases.
3. Faster: Theater View will run up to 16 concurrent object updates instead of 4 concurrent updates for user interface elements.
4. Fixed: Handheld syncing could send duplicate files when one side had a space after semi-colons in a list and the other side had no spaces.
5. Fixed: The FormatDate(...) token datetime was not working properly.
6. Fixed: XMP tagging would write empty keywords when removing keywords instead of actually removing them from the XMP tag.
17.0.112 (3/22/2012)
1. Fixed: List column header text was using the wrong color in build 111.
2. Changed: Consolidated and improved date formatting supported by FormatDate(...) expression ( details here: http://yabb.jriver.com/interact/inde...9314#msg479314 ).
3. Fixed: All XMP keywords were not being read in some cases.
4. Fixed: Some functions in Media Editor were not working properly.
5. Changed: MP4 parsing is more forgiving of some types of container corruption.
6. NEW: Add DLNA controller option to disable SetNextAVTransportURI support for broken renderers.
7. Changed: DLNA controller logic for SetNextAVTransportURI to work around bugs in some renderers.
8. NEW: Added support for /Sleep [milliseconds] command to the launcher to allow scripting delays. To sleep one second: MC17.exe /Sleep 1000
17.0.111 (3/21/2012)
1. Faster: More SSE speed improvements in image framework.
2. Changed: The expression engine trims white space before the first parameter and after the last parameter in a function (you can force white-space output by escaping with a slash).
3. Changed: In the expression engine, if a slash (the escape character) is followed by newline, all white space will be discarded (including the newline).
4. Changed: Improved support for SSA font face and position tokens.
5. Changed: Improved support for SSA command blocks that string many commands or formatting tokens into a single block (ie. {\i1\fnVerdana}).
6. NEW: Added an Indonesian translation (thanks to elda).
7. Changed: Switched list headers from a skinned system control to a custom JRiver control (please report any issues).
8. Fixed: Audio playback using DirectShow filters did not nicely handle mid-stream format changes (could cause problems with DTS WAV files, maybe others).
9. Changed: Tuned DTS-in-WAV detector to better handle DTS files with junk between the DTS frames.
10. Changed: Carnac better understands MakeMKV filenames (ie. t01_The_Matrix.mkv).
17.0.110 (3/19/2012)
1. Changed: Revised the bilinear image portion of JRMark to be more representative of how the program uses bilinear stretching (older JRMark values will be roughly comparable, but not exactly the same).
2. Faster: More speed improvements to SSE in image engine.
3. Changed: DLNA: the way the updateID is incremented. If a starting index is >0 the updateID is not incremented.
17.0.109 (3/16/2012)
1. Fixed: Ripping DVD "Cars 2" would cause a crash.
2. Changed: When burning a DVD video disc, if there is a DRM protected file in the burn queue, an appropriate error message is now shown.
3. Fixed: EPG loading could load incorrect channel data in certain cases.
4. Changed: Carnac better handles SageTV recording filenames that use a 6-digit identifier instead of a 7-digit identifier.
5. Changed: Image framework uses SSE for core rendering when possible. Should also be faster.
17.0.108 (3/15/2012)
1. Changed: Improvements to Carnac parsing of download filenames.
2. Changed: EPG channel auto-match did not run for all DVB variants.
3. Changed: Tuned the EPG channel auto-match for non-ATSC channels.
17.0.107 (3/14/2012)
1. Fixed: EPG loading was not working properly for some country / postal codes.
2. Fixed: Locked views could cause the view state to be lost between program startups.
3. Changed: Better error handling during DVD video burning.
A quando MC 18 con il 3D? :)
Ciao Mario, i Lav 0.5 li puoi scaricare ed installare anche manualmente senza avere una connessione ad internet, insieme a Madvr.
Per Madvr però devi mettere la cartella su "C:\Users\xxx\AppData\Roaming\J River\Media Center 17\Plugins" dopo puoi installare madvr. Per i LAV basta eseguire l'eseguibile.
Su Jriver vai nei setting del programma e nella modalità video metti "RED OCTOBER HQ" ovviamente se il tuo computer lo consente altrimenti vai su standard.
Per il resto il video dovrebbe partire.... e tutto dovrebbe essere autoconfigurato correttamente da Jriver, ovviamente a te potrebbe però succedere la qualsiasi.:D
Appena installi i LAV su programmi troverai quelle voci dette da te.
ciao ciccio, grazie per la risposta
sono "distrutto", non so più dove sbattere la testa :cry::cry:
anche io pensavo (come giustamente mi hai suggerito...) che bastasse installare i LAV ma purtroppo non è così
sia prima che dopo l'installazione del LAV, jriver mi da sempre lo stesso messaggio "something went wrong, unable ....LAV splitter..." ecc...
non so più cosa fare
ho provato anche il suggerimento di stealth (che mi sembrava un'idea geniale) ovvero installare jriver su un pc collegato ad internet, fargli scaricare automaticamente i componenti necessari e poi copiare tutta la cartella "plugins" al posto di quella presente non pc non collegato ad internet.... ma NON funziona
su programmi trovo effetivamente le tre voci audio-splitter-video ma non saprei come procedere.
probabilmente l'installazione è ok ma sono io che non so impostare bene i settaggi per far sì che jriver veda i LAV
(ma mi servono ANCHE i madvr ??)
ma nei "general video settings" nel mio caso metto un red october o devo mettere un "advenced-- custom" ?
e poi in advanced--custom, cosa metto in
-start with the following settings
-apply the following rules
-type
-filter
?
ci terrei proprio a provare questo player ma senza il vostro aiuto rischio di dovermi accontentare di PDVD11... non è che non vada bene, ma con una Xonar ST+H6 vorrei sentire come vanno questi benedetti ASIO !
Help !
Grazie
Mario
Installando i LAV manualmente funziona, perchè già provato da me.
Per esserne sicuro fai una prova, e cioe:
Vai su video poi custom mode setting poi aggiungi come video decoder LAV nelle rules, fatto questo selezione LAV e vai sulle proprietà sempre della stessa finestra. A questo punto si apre la schermata di Lav decoder, in basso a destra dovresti vedere se risulta la versione installata da te manualmente.
Ma hai installato anche l'ultima versione di Jriver?
Grazie Ciccio, a me interessa processare le partite che non sono in chiaro quindi che necessitano dell'abbonamento..
Nessuno Usa tale sistema o per lo meno sa se si puo' fare?
Se installassi un accessorio del genere entrerebbe in catena?
GRAZIE
Stò usando con soddisfazione JRiver 17, ma ho alcuni dubbi che spero possano essere chiariti da qualche utente del forum.
Non mi è ben chiara la differenza tra room correction e parametric equalizer; infatti entrambi mostrano la possibilità di effettuare il bass management ma non mi è chiaro come, nel caso del parametric equalizer, sia possibile reindirizzare le basse frequenze di ogni canale (che nel mio caso presentano tagli differenti a seconda del canale) verso il subwofer.
Come renderer utilizzo madvr, ma per non vanificarne le qualita, vorrei capire come impostare l'uscita della scheda video, che nel mio caso è una ATI 4xxx. L'uscita della scheda può essere impostata come component 4:4:4 e 4:2:2 ed rgb full limited, mi interessa quindi capire, ammesso che sia possibile, quale delle uscite sottopone il segnale video in uscita al minore numero di manipolazioni possbili.
ciao a tutti,
nell'attesa di capire come poter caricare (E FAR FUNZIONARE) manualmente i LAV... ho bypassato momentaneamente il problema video per dedicarmi a capire le varie potenzialità dell'audio.
utilizzando un dvd e non un bluray il problema dei LAV non si presenta e mi posso concentrare sull'audio...
da playback options ho selezionato (FINALMENTE :D) ASIO ma adesso viene il bello...
mi pare di aver capito che se seleziono ASIO il pannello della mia Xonar ST viene completamente saltato e quindo tutti i settaggi che ho fatto li devo rifare in jriver...
sui setting di "DSP e output format" c'è una infinità di settaggi e a tal proposito avrei alcune domandine...
1) nel sample rate, conviene lasciare "no change" nell'output o sarebbe meglio fare upsampling alla massima frequenza raggiungibile dalla scheda audio ? che vantaggi si avrebbero ? (portando ad esempio un 44100 a 192000)
2) esiste la possibilità di far settare automaticamente un 2.0 se metto un CD e 5.1 se metto un dvd/BR ? io non ho trovato il modo. Ho visto che c'è una opzione "for stereo sources, only mix to 2.1" ma se lo volessi 2.0 senza usareil sub e facendo riprodurre tutte le frequenze ai frontali ?
3) se nel mixing metto JRSS v2.0 si attiva la tendina alla voce subwoofer con le varie frequenze di taglio. Ma se volessi mettere "no upmixing or downmixing" la voce subwoofer diventa grigia...e dove vado a dire a jriver che voglio tagliare il sub a 80Hz ? Ma questo subclarity serve davvero ?
4) quando seleziono una traccia audio in un film, dove vedo con sicurezza le caratteristiche della traccia che ho scelto e le caratteristiche di cosa il pc sta realmente riproducendo ? abituato a PDVD dove mettevo a video le info... qui non mi ritrovo... se seleziono un DTS HD vorrei essere sicuro che il software mi stia riproducendo effettivamente un DTS HD e non lo stia trasformando in un semplice 5.1...
spero che qualcuno possa chiarire questi piccoli dubbi in modo da avere delle certezze come base di partenza...
grazie
ciao
Mario
Voi riuscite a gestire i sottotitoli con i DVD? Io vorrei modificare la grandezza e la posizione (utile con schermo formato 2,35:1), ma non ci riesco. Con i BD non lo so, perchè al momento uso jriver solo con il portatile.